OpenZeppelin Blog

Eco Contracts Audit - OpenZeppelin blog

Written by OpenZeppelin Security | January 14, 2020

The Eco team asked us to review and audit the contracts for their open payment network. We looked at the code and have now published our results.

About Eco

Eco is building a transactional cryptocurrency and an open payment network, both designed to maximize user participation, transparency and consumer protection. The first version of this system is built on Ethereum.

The Eco cryptocurrency is intended to demonstrate lower volatility over time, not as a pegged stablecoin but as a floating currency with active governance by expert users. These elected experts monitor the state of the Eco economy, and periodically vote on adjustments to key economic variables (including supply changes, new supply distribution, internal interest rates, transaction fees, etc.).

Eco’s system is extremely modular. Every component and contract can be upgraded or even replaced through community governance, in which every Eco token holder is able to vote.

Learn more about the Eco project on their Frequently Asked Questions site. Additional technical documentation and their whitepaper should be available soon after the publication of this audit report.

Note: The Eco project was previously called Beam.io. The renaming happened while we were auditing the codebase, so you will find references to the old name in some of the original commits.

About the audit

It has been a year long journey since we met the Eco team and their project. This engagement started right at the time when we were restructuring our audits team. The objective of our new structure was to research best practices and security vulnerabilities of systems more complex and revolutionary than the ones we had audited before, so this was the best possible system to get started with. The engagement is ending now with our team bigger, stronger, and happier than ever before.

It feels like the Eco system was evolving at the same time that it was helping us with our evolution. This is what you will see in this huge consolidated report of the 5 phases of the audit: a plurality of voices, approaches, and technologies that our team used to help improve the quality and security of the projects that the Eco team was building.

In the first phase, we audited 3 components: Deploy, Proxy and Policy. The Deploy component takes care of bootstrapping the system and getting the smart contracts into the blockchain. It uses a clever idea proposed by Nick Johnson to deploy to all the test networks and to the mainnet using the same addresses. The Proxy component allows the smart contracts to be upgraded. The Policy component is a generic management framework that allows some contracts to be managed by others.

The second phase was for the Currency component, which is the implementation of the Eco token.

The third phase was for the Governance component, which is in charge of the voting for policy changes and the voting for inflation and deflation decisions.

In the fourth phase, we audited the implementation of a Verifiable Delay Function, that is used for the commit and reveal schema needed for the votes.

In the fifth phase, we reviewed all the changes that the Eco team has implemented to fix the vulnerabilities we have reported. We also spent some time analyzing the system as a whole and trying to attack the integration points of all the components.

Finally, one last review of unsolved issues was carried out, in which we updated each report of the five phases with Eco’s statements where appropriate. The last reviewed commit of the currency repository is 68adc904.

By now, almost every single member of the OpenZeppelin team has participated in some way on this project. Some have tried very hard to break the system, some have joined discussions to come up with ideas to simplify very complicated operations, some have spent long nights obsessing about deciphering that last line of assembly code…

As we got deeper into the code, we got more engaged with the project. As the Eco team started fixing the problems we were finding, we got stricter and more demanding. By the end, we had collected 8 vulnerabilities of critical severity and 9 vulnerabilities of high severity, along with many less critical issues and multiple suggestions to make the code clearer. Most of them have been successfully fixed by the Eco team by now. As one of our teammates said, it was amazing to see the improvements in the code during this year. Now, they have some of the best contracts we have seen in terms of organization, documentation, and readability.

You can see the reports of the individual phases for extensive details of every vulnerability found and how they have been fixed or mitigated.

Recommendations before releasing to production

  • Make all the audited repositories public. Parts of the code have been integrated into a single repository, so the old repositories should be deprecated.
  • Increase the unit test coverage to 100%.
  • Limit future pull requests to one single and independent change for improved traceability.
  • Move the documentation of the contracts API from the README files to a documentation website, like the OpenZeppelin Contracts website (which uses solidity-docgen).
  • Perform an audit to verify the cryptographic strength of the Verifiable Delay Function.
  • Perform a game theoretic evaluation of the incentives of the system. In particular, note that votes that use a past snapshot of the balances could have perverse incentives. Users may sell their tokens before casting their votes, having nothing at stake when the results are executed. Game-theoretical analysis is a service we have recently started offering at OpenZeppelin, led by Austin Williams.
  • Start building a community of users and contributors. We recommend the books and resources published by Jono Bacon.
  • Deploy the full system to testnet.
  • Design a beta phase with enough incentives for a big and diverse community to participate.
  • Start a bug bounty program to give real economic incentives to attack the system, even during testing. We recommend the HackerOne platform.
  • Publish guides explaining how to write new policy contracts.
  • Write automated validators to ensure that new policy contracts implement the correct interfaces and will not break the system. You can follow a similar approach to OpenZeppelin’s ERC20 verifier.
  • If the Eco token implements the ERC777 standard, the hooks that accounts can execute introduce the risk of reentrancy attacks and can revert operations. Be extremely careful with the transfer of these tokens: Use the checks-effects-interactions pattern, pull payments, reentrancy guards, or execute the transfer without triggering the hooks.
  • After the upcoming Istanbul fork, the reprice of EIP1884 will affect the implementation of proxy contracts with a payable fallback function. When adding upgrades or new components to the system, use pull payments or the sendValue helper.
  • Move the BigNumber library to a separate repository. The OpenZeppelin Contracts maintainers might be interested in adding it to the project and co-maintaining it.
  • Consider adding a Super User module during the first months of production. This will allow for emergency upgrades to the contracts that cannot wait for the Policy vote period. Then, it can be removed when the project has proved to be stable and ready for full decentralization.
  • Consider using Meta Transactions for easier on-boarding of new users and to allow them to interact with Eco tokens, even if they do not have ether.

JTNDZGl2JTIwY2xhc3MlM0QlMjJidG4tY29udGFpbmVyJTIyJTNFJTBBJTBBJTNDYnV0dG9uJTIwb25jbGljayUzRCUyMmN1c3RvbXNjcm9sbCUyOCUyOSUyMiUzRSUzQ2ElMjBocmVmJTNEJTIyJTIzcGhhc2UtMSUyMiUyMGNsYXNzJTNEJTIyY3VzdG9tLWxpbmslMjIlM0VyZWFkJTIwZnVsbCUyMHJlcG9ydCUzQyUyRmElM0UlM0MlMkZidXR0b24lM0UlMEElMEElM0MlMkZkaXYlM0U=

Phase 1: Deploy, Policy and Proxy

The phase 1 audit was delivered to the Eco team on December 17th, 2018.

The locations and versions used for this report are:

Governance:

Our biggest challenge during the audit was to understand how the three repositories for deployment, bootstrap, and proxy forwarding work together. We consider this process to be very complicated. Because the whole system will be built on top of this phase, it becomes one of the most vulnerable parts of the project.

We think the Eco team should consider simplifying the process by using and contributing to other projects that are focused on infrastructure so they can focus instead on building the payments network. For example, the OpenZeppelin SDK provides an upgrade proxy that is already tested and in production, so they can use it instead of having to test and maintain the risky assembly blocks on beam-bootstrap-chain and policed-contracts. By using OpenZeppelin, they will not need to deploy the contracts using Nick’s method because the configuration files store the locations for every package on all the networks. Another example is Aragon, which provides voting solutions that can be used to govern when and how to modify the parameters of the system.

This is not to say that nobody should develop their own infrastructure if what is out there does not fit their needs. However, it should be taken into account that these are complex problems on their own and that this code will have to be a lot better documented and tested on isolation and end-to-end in order to ensure its safety.

Here are our audit assessment and recommendations, in order of importance.

Update: The Eco team made some fixes based on our recommendations. We address below the fixes introduced up to commit af3428020545e3f3ae2f3567b94e1fbc5e5bdb4c of the currency repository, which now includes all the previously audited files of the deploy, proxy, and policy components.

 

Critical Severity

[P1-C01] The bootstrap process can be hijacked

Critical

Components: deploy and proxy

The BeamBootstrap contract stores its owner in the deployAccount variable, which also gets transferred to 20 ForwardProxy contracts through BeamInitializable.

The BeamInitializable contract also uses an ownership pattern, which allows only the owner to set the implementation that will be delegated from the proxy and to selfdestruct the contract.

The issue here is that the initialize function is public. It does not have a restriction that only the owner can call, and it can be called more than once.

For an attacker to hijack the entire Bootstrap process, it would only require them to deploy a malicious contract like this:

contract Malicious {
    address public owner;

    constructor(address _owner) public {
        owner = _owner;
    }
}

This sets an address in their control as the owner. Then, they can feed it to the 20 FordwardProxys through a BeamInitializable interface, call initialize with the address of the Malicious contract, and give themselves ownership of all the ForwardProxys.

They can also get ownership of the original BeamInitializable contract, but that does not seem to give them any gain.

Test case: https://gist.github.com/mattaereal/9a7fe9d20b3c3253b1effe049cb9211e

Consider requiring that only the owner can call the initialize function, thus making it possible to call it only once during initialization with the onlyConstruction modifier.

Update: Partially fixed. The destruct function now can be called only by the owner. The initialize function can be called only once. However, initialize can still be called by any account, not just by its current owner. Eco’s statement for this issue:

The problem highlighted here has two parts to consider. First, the addresses reserved by EcoBootstrap respond to the initialize call described. These proxy contracts have their implementation slot set, so the onlyConstruction modifier will prevent calls. The modifier might not protect the underlying implementation contract though – since the underlying implementation isn’t itself a proxy contract the implementation slot might not be set. Fortunately, the ForwardTarget constructor is run when the EcoInitializable contract is deployed, and it sets the implementation slot. This makes it impossible to call initialize on the underlying implementation contract.

Per OpenZeppelin’s audit, initialize can only be called once on any proxy, and it’s always called immediately during proxy construction – ensured by the ForwardProxy constructor. Further, the onlyConstruction modifier checks the implementation slot, which is set in the EcoInitializable constructor preventing any calls at all on contracts that are deployed directly. OpenZeppelin’s finding is correct, any account can make the one permissible call initialize, but there is no exposure here because either the ForwardProxy constructor or the EcoInitializable constructor always consumes the call.

[P1-C02] Storage collision on Policed contract

Critical

Component: policy

Policy contracts have the power to enforce actions over Policed contracts (i.e., the latter are managed by the former). This means that Policy contracts are allowed to execute arbitrary code in a Policed contract context, as long as the Policy contract is set as the manager during construction.

This enforcement of actions is done via the policyCommand function of the Policed contract, which can only be executed by the managing policy – this last restriction being enforced by the custom onlyPolicy modifier.

The policyCommand function, acting as a proxy, uses a low-level assembly implementation of delegatecall to allow any address passed in the _delegate parameter to execute any logic but in its context (i.e., with access to the Policed contract storage). While this operation may be initially considered safe, since it is the Policy contract that is triggering it, the logic contract in charge of executing the code may unexpectedly overwrite the whole Policed contract storage due to the storage collision vulnerability. This vulnerability can be exploited as follows.

Given a Policy contract such as:

pragma solidity ^0.4.24;

import "../contracts/Policy.sol";
import "../contracts/Policed.sol";
contract BadPolicy is Policy {
    function execute(address policedAddr, address logicAddress, bytes data) public {
        // This contract manages the contract at `policedAddr`, so it can call `policyCommand`
        Policed(policedAddr).policyCommand(logicAddress, data);
    }
}

And the following contract with some logic that the Policy is going to enforce over the Policed contract:

pragma solidity ^0.4.24;

contract BadLogic {
    address public firstSlot = address(0x123);
    address public secondSlot = address(0x123);

    event Overwrite();

    /**
     * Instead of writing to this contract state variables,
     * when overwriter is called via delegatecall, it will end up
     * writing to the caller's state variables at first and second
     * position of the caller's storage.
     */
    function overwriter() public {
        firstSlot = address(0);
        secondSlot = address(0);
    }

    // [... some more logic ...]
}

By looking at the overwriter function, one could initially think that it will just write over its firstSlot and secondSlot state variables, no matter how it is called. However, as the logic contract will be called via a delegatecall, the overwriter function will unexpectedly write over the first and second slot of the Policed contract (i.e., over the implementation variable in the first slot and the policy variable in the second slot, with the former inherited from ForwardTarget), without ever writing to its own state variables firstSlot and secondSlot.

Here is a snippet of the Policed contract showing its state variable policy:

pragma solidity ^0.4.25;
pragma experimental "v0.5.0";

import "erc820/contracts/ERC820ImplementerInterface.sol";
import "@beamnetwork/bootstrap-chain/contracts/ForwardTarget.sol";


/** @title Policed Contracts
 *
 * A policed contract is any contract managed by a policy.
 */
contract Policed is ForwardTarget, ERC820ImplementerInterface {
    address public policy;
// [...]
}

A proof of concept of this issue goes as follows:

const BadPolicy = artifacts.require('./BadPolicy.sol');
const BadLogic = artifacts.require('./BadLogic.sol');
const Policed = artifacts.require('Policed');
const assert = require('assert');

contract.only('Policed contract', () => {
  const NULL_ADDRESS = '0x0000000000000000000000000000000000000000';

  beforeEach(async function () {
    this.badPolicy = await BadPolicy.new();

    // BadPolicy contract manages the Policed contract
    this.policed = await Policed.new(this.badPolicy.address);

    this.badlogic = await BadLogic.new();
  });

  describe('Storage collision', () => {
    it('overwrites Policed contract storage', async function () {
      // First, assert that initially the storage is not null

      // `implementation` is at slot 1, inherited from ForwardTarget contract
      assert.notEqual(await this.policed.implementation(), 0);
      // `policy` is at slot 2, defined at Policed contract
      assert.equal(await this.policed.policy(), this.badPolicy.address);

      // Make the managing policy execute the `overwriter` function in BadLogic contract
      const functionSignature = web3.utils.sha3('overwriter()').slice(0, 10);
      await this.badPolicy.execute(this.policed.address, this.badlogic.address, functionSignature);

      // Assert that the state variables at BadLogic were never written
      assert.notEqual(await this.badlogic.firstSlot(), NULL_ADDRESS);
      assert.notEqual(await this.badlogic.secondSlot(), NULL_ADDRESS);

      // Assert that finally the whole storage
      // was accidentally overwritten by BadLogic.sol#overwriter. Boom.
      assert.equal(await this.policed.implementation(), 0);
      assert.equal(await this.policed.policy(), NULL_ADDRESS);
    });
  });
});

Low-level calls such as delegatecall are always to be implemented with utter care and be thoroughly tested. Strategies to avoid this vulnerability, along with further cases and explanations, can be found at OpenZeppelin SDK documentation on unstructured storage.

Update: Partially fixed. The implementation is now stored in unstructured storage. The policy variable is still stored in the first slot of the delegator contract, making it vulnerable to storage collisions. Eco’s statement for this issue:

The unstructured storage approach recommended by OpenZeppelin here does help prevent accidental storage collisions, but at the same time it significantly complicates maintenance and upgrades in the future. Eco’s engineering team has adopted OpenZeppelin’s unstructured storage approach for the core proxy functionality (the implementation slot), but prefers to adopt policies and develop tools to manage the risk for other parts of the system. Specifically, when dealing with the policy slot identified here, we plan to extend our linter rules and thoroughly test upgrades to ensure collisions do not cause problems.

 

High Severity

[P1-H01] Missing test coverage reports

High

Components: all

There are no test coverage reports on any of the repositories. Without these reports, it is impossible to know whether there are parts of the code which are never executed by the automated tests. For every change, a full manual test suite has to be executed to make sure that nothing is broken or misbehaving.

Consider adding the test coverage reports and making it reach at least 95% of the source code.

Update: Partially fixed. The test coverage report was added to the currency repository, reporting 92% of coverage. Eco’s statement for this issue:

Test coverage of our contracts is around 98%. Our overall coverage reporting includes the additional JavaScript tooling included in the repository, used for deployment and testing. Coverage on the JavaScript code is intentionally less thorough, approximately 87%. This allows us to iterate more quickly on the JavaScript code, while still covering the core functionality.

[P1-H02] Low unit test coverage

High

Components: all

In the deployment-nicks-method repository, there are no tests at all.

In beam-bootstrap-chain:

  • Test case file named compute-gas.js only deploys a BeamBootstrap contract and nothing more. It does not compute gas as supposedly intended.
  • The ForwardTarget and BeamBootstrap contracts have no unit tests.

In policed-contracts, only the Policed contract has tests.

Tests are the best way to specify the expected behavior of a system. Automating these tests and running them continuously pins down the behavior to make sure that it is not broken by future changes.

Consider adding unit tests for every code path. Consider running the tests on every pull request.

Update: Partially fixed. Extensive tests have been added to the currency repository. However, it has 92% of test coverage. See Eco’s statement for this issue in [P1-H01] Missing test coverage reports.

[P1-H03] Outdated ERC820

High

Component: policy

In line 59 of Policy.sol and in line 49 of PolicedUtils.sol, the hard-coded address for the ERC820Registry contract is outdated.

The address used is 0x820c4597Fc3E4193282576750Ea4fcfe34DdF0a7.

The correct address is 0x820b586C8C28125366C998641B09DCbE7d4cBF06.

Also, the npm dependency “erc820”: “0.0.22” is outdated. Moreover, it is set as fixed in the package.json file, so not even minor changes in the versions will be downloaded when users run npm install.

The address and version used correspond to a previous version while the standard was a work in progress. Now, the standard is on the final call, but there is still a chance that a new version will be released and/or that the address will change.

Consider changing the address of the ERC820Registry to point it to the actual one. Consider updating the version of the erc820 package and allowing it to install newer minor versions.

For further reference: https://eips.ethereum.org/EIPS/eip-820

Before deploying to production, confirm that the EIP is final, that the address has not changed, and that the package version used is the latest.

Update: Fixed. The EIP 820 is now final, but the Eco team found and reported an issue to the implementation. A new EIP 1820 was proposed to fix it, and it now supersedes EIP 820. The contracts are now using the upstream implementation of EIP 1820.

 

Medium Severity

[P1-M01] There are multiple hard-coded constants

Medium

Components: all

Hard-coded booleans, numbers, and strings in the code are hard to understand, and they are prone to error, because after some time, their origin and context can be forgotten or mistaken.

For example:

In deployment-nicks-method:

In beam-bootstrap-chain:

In policed-contracts:

  • Policy.sol:L59: hard-coded address
  • erc820.js:L5: bytecode without comment
  • erc820.js:L9: hard-coded address
  • erc820.js:L10: hard-coded address

Consider defining a constant variable for every hard-coded value, giving it a clear and explanatory name. For the complex values, consider adding a comment explaining how they were calculated or why they were chosen.

Update: Fixed. All the hard-coded values mentioned above have been moved to constants, commented, or removed.

[P1-M02] Unit tests are not verifying a single condition

Medium

Components: all

Every unit test should verify a single code path to ensure isolation and to make it easier to blame a single line of code when one of the tests fails. The test structure should follow the four phase pattern, clearly separating the interactions with the system under test from the verification.

Consider splitting the tests to make them fully isolated and as short and focused as possible. Consider following the four phase pattern on each of them. Consider following a data-driven pattern for test cases with multiple scenarios like the abs tests.

Update: Fixed. Many tests have been added with a nice and clean style.

[P1-M03] Solidity optimizations in tests may cause unpredictable behavior

Medium

Components: policy and beam-bootstrap-chain

In beam-bootstrap-chain/truffle.js and policed-contracts/truffle.js, Solidity optimizations are enabled.

Solidity has some optimizations that are default and are always executed, and some others are optional. Enabling the optional ones increases the risk of unexpected behavior, since they are not as battle-tested as the default optimizations. Consider adding full test coverage without optimizations before enabling them to verify that the introduced optimizations preserve expected behavior.

Update: Partially fixed. Test coverage has improved a lot, but it is still not 100%. A note has been added to the README to take this risk into consideration. Eco’s statement for this issue:

Our Solidity test coverage is 98%. While this is slightly less than 100%, we’re satisfied that it covers the risk introduced by using the Solidity optimizer.

[P1-M04] Overriding initialize is confusing

Medium

Component: proxy

The ForwardTarget contract defines and implements the initialize function. Then, the BeamInitializable contract inherits from ForwardTarget and overrides the initialize function.

It is not clear if this function is intended to be overridden, but if so, it is not clear why it has an implementation.

Consider documenting the intended use of ForwardTarget as a base class, explaining when and how to override the initialize function. Also, consider commenting on the overriding functions to make it clear that they are not shadowing members from the base class by mistake.

Update: Fixed. A comment has been added to the initialize function to clarify its use.

[P1-M05] Missing zero address checks

Medium

Components: deploy and proxy

The functions that take an address as an argument are not validating that the address is not 0.

For example:

In most cases, passing a 0 address is a mistake.

Consider adding a require statement to check that the address is different from address(0).

Update: Fixed only in EcoBootstrap.sol. Eco’s statement for this issue:

Thorough testing prevents our system from mistakenly passing the 0 address when initializing a contract or configuring a proxy. Inserting code to prevent the 0 address from being passed at all also prevents us from doing so intentionally, so as a practice we avoid disallowing the 0 address in code.

[P1-M06] Unclear public cloning functionality

Medium

Component: policy

The PolicedUtils contract includes a public function clone, which according to the docstrings, “Creates a clone of this contract by instantiating a proxy at a new address and initializing it based on the current contract […].”

However, the rationale behind including such a functionality is never explained, nor is it clear if the function is supposed to be public and called by anyone.

The single test that attempts to cover the cloning functionality is too vague and poorly documented to understand what is being tested and, more importantly, why. Furthermore, it strangely uses a mock to wrap the clone function inside another cloneMe function, the latter being the one called during the test.

Consider including further tests (while enhancing the existing one) and more thorough documentation regarding the cloning functionality. Moreover, analyze restricting the visibility of the function through custom modifiers if it is not supposed to be called publicly but only by certain privileged accounts.

Update: Fixed. More documentation has been added to the clone function. The test has been improved, but note that the cloneMe function is still confusing.

[P1-M07] Lack of input validation

Medium

Component: policy

In multiple functions, the values received as arguments are not validated.

In PolicyInit.sol:

  • In the fusedInit function:

In Policy.sol:

  • In the internalCommand function, not checking for zero address: _delegate

In Policed.sol:

  • In the constructor, not checking for zero address: _policy
  • In the initialize function, not checking for zero address: _self

In PolicedUtils.sol:

  • In the initialize function, not checking for zero address: _self
  • In the setExpectedInterfaceSet function, not checking for zero address: _addr

Consider implementing require clauses where appropriate to validate all user-controlled input.

Update: Only the check for a different implementation has been fixed. Eco’s statement for this issue:

The fusedInit function of PolicyInit is only called by our own code during deployment and immediately disabled, so we’re not concerned about invalid inputs. Policy, Policed, and PolicedUtils are library contracts that are built on top of our contracts. User-provided addresses are never passed to the functions described, so we’re not concerned about accidental 0 address values.

 

Low Severity

[P1-L01] README empty or missing important information

Low

Components: all

The README.md on the root of the GitHub repositories are the first documents that most developers will read, so they should be complete, clear, concise, and accurate.

The README.md files of deployment-nicks-method, beam-bootstrap-chain and  policed-contracts, have little or no information about what the purpose of the project is nor how to use it.

In beam-bootstrap-chain, it describes a set of instructions to create a bootstrap transaction without the needed context to understand it, including a command named generate-portable-transaction, which is not available. A a sample of the output file used in the example bootstrap-truffle.json is also not available.

Consider following Standard Readme to define the structure and contents for the README.md file. Consider including an explanation of the core concepts of each repository, the usage workflows, the public APIs, instructions to test and deploy them independently, and how they relate to the other repositories in the Beam project.

Update: Fixed. All repositories and some sub-directories now have good README files.

[P1-L02] Missing comments on the code and comments not following NatSpec

Low

Components: all

In the beam-bootstrap-chain and  policed-contracts repositories, there are some contracts, struct fields, state variables, mapping keys, functions and parameters without comments, some with comments that do not follow the NatSpec format, and some that are missing important details on their comments.

In the deployment-nicks-method repository, there are no comments at all.

This makes it hard to understand the code and to review that the implemented functionality matches the intended behavior.

Consider adding docstrings for all contracts, struct fields, state variables, mapping keys, and functions, paying particular attention to the ones that represent complicated concepts. Consider following the NatSpec format thoroughly for docstrings to improve documentation and code legibility.

Update: Fixed. Many comments have been added to all the contracts. Most of them exhaustively document the parameters and strictly follow the NatSpec format.

[P1-L03] Not following consistent code style

Low

Components: all

A consistent code style is essential to make the code base clear and readable and to make it possible to combine contributions from wildly diverse people, as is the case in open source projects.

Consider making every file in the project follow the documented code style guide and enforce that every new contribution sticks to this code style by adding a linter check that runs on every pull request.

Note that eslint does not enable any rules by default, so at least, the recommended rules should be added to the configuration file.

Update: Fixed. The two repositories now follow a consistent code style and have rules and tasks for running solhint and eslint.

[P1-L04] Functions can be made external to clarify intended use

Low

Components: all

In beam-boostrap-chain, BeamBootstrap‘s cleanup, BeamInitializable‘s cleanup, and setImplementation are never called internally.

In policed-contracts, policyFor is never called internally.

Consider making the functions external to clarify intended use. If they should be public, consider documenting the reason and intended use from inside the contracts.

Update: Fixed.

[P1-L05] Undocumented assembly code

Low

Components: policy, deploy, and proxy

In beam-bootstrap-chain, the fallback function of ForwardProxy, and in policed-contracts, the policyCommand of Policed use a complex assembly block without comments.

This is a low-level language that is difficult to understand.

Consider documenting the mentioned function in detail to explain the rationale behind the use of assembly and to clarify what every single assembly instruction is doing. This will make it easier for users to trust the code, for reviewers to verify it, and for developers to build on top of it or update it.

Note that the use of assembly discards several important safety features of Solidity, so this is a highly vulnerable part of the project. Consider implementing thorough tests to cover all potential use cases of the ForwardProxy contract to ensure it behaves as expected.

Update: Fixed. Extensive documentation has been added to the assembly code blocks. Tests have been added to the policy and bootstrap contracts.

[P1-L06] Unused imports

Low

Components: policy, deploy, and proxy

In beam-bootstrap-chain, SampleForward.sol imports ForwardProxy and never uses it.

In policed-contracts, Policy and PolicedUtils import ERC820ImplementerInterface and never use it.

Consider removing unused imports.

Update: Fixed. The unused imports mentioned above have been removed.

[P1-L07] Not using the latest OpenZeppelin Contracts library

Low

Components: policy and deploy

beam-bootstrap-chain and policed-contracts are using openzeppelin-solidity v1.12.0. This is an outdated release. At the time of writing, the latest stable version was v2.4.0.

Consider updating the projects to the latest openzeppelin-solidity version.

Update: Fixed. The openzeppelin-solidity dependency has been updated.

[P1-L08] There are multiple typos

Low

Components: policy

There are multiple typos in the repository:

In policed-contracts:

  •  

Consider running codespell on pull requests.

Update: Fixed. The typos mentioned above have been fixed.

[P1-L09] Reimplementing the Ownable pattern

Low

Component: deploy

BeamInitializable and BeamBootstrap implement the Owner pattern (with the latter calling it deployAccount).

Consider using the Ownable contract from OpenZeppelin instead of reimplementing it.

Update: A comment has been added explaining the reason for not using Ownable from OpenZeppelin.

[P1-L10] Unnecessary empty constructors defined

Low

Component: policy

Both Policy and PolicyInit define empty constructors, which is not necessary and only hinders code readability. According to the Solidity docs on constructors, “If there is no constructor, the contract will assume the default constructor: constructor() public {}.”

Consider removing all empty constructors from the codebase.

Update: Fixed. Policy and PolicyInit no longer have empty constructors.

[P1-L11] Proxy delegation logic can be simplified

Low

Component: policy

The fallback function in charge of the delegation process for the proxy can be simplified. It is not necessary to use the free memory pointer, and returndatasize can be saved to a variable instead of calling it twice. Also, the result of delegatecall can be checked after the returndatacopy to avoid the duplicated statement.

Because this code is hard to understand and Solidity does not check its safety, it is a good idea to make it as short and clear as possible.

Consider refactoring the assembly block. See the OpenZeppelin SDK delegate implementation as an example of a thoroughly tested alternative.

Update: Partially fixed. The proxy implementation no longer uses the free memory pointer. Eco’s statement for this issue:

The current implementation minimizes gas overhead, which was an important design consideration for us.

 

Notes & Additional Information

  • All the contracts in the beam-bootstrap-chain and policed-contracts repositories use the Solidity pragma experimental "v0.5.0"; statement. This is a way to allow early testing of the features released on Solidity v0.5.0, but as the name implies, the features are experimental on top of the stable version and shouldn’t be used on production systems. We don’t recommend publishing contracts with pragma experimental to mainnet. Before releasing to mainnet, consider removing it and just use a stable Solidity version.
    Update: Fixed. Eco now uses Solidity 0.5.12 without the experimental pragma.
  • Good naming is one of the keys for readable code. Clean code facilitates future changes. To favor explicitness and readability, several parts may benefit from better naming. Our suggestions are:
  • Several variables are not explicitly declared as uint256 or int256 but just as uint or int. Explicit is better than implicit. Consider changing all occurrences of this issue to improve code legibility and avoid any confusion.
  • In many code segments of the policed-contracts repository, this is used instead of address(this) to refer to the contract’s address. For example, in PolicedUtils.sol:L26,L50,L66,L67 and in PolicyInit.sol:L54,L58,L60, to favor explicitness and code readability, consider casting this to address(this) where appropriate.
    Update: PolicedUtils and PolicyInit are now casting this to address.
  • In the test file cycle.js of beam-bootstrap-chain, some contract artifacts are required by name and some by path. Consider following a consistent style for all the required artifacts.
    Update: All artifacts are now required by name.

JTNDZGl2JTIwY2xhc3MlM0QlMjJidG4tY29udGFpbmVyJTIyJTNFJTBBJTBBJTNDYnV0dG9uJTIwb25jbGljayUzRCUyMmN1c3RvbXNjcm9sbCUyOCUyOSUyMiUzRSUzQ2ElMjBocmVmJTNEJTIyJTIzc3VtbWFyeSUyMiUyMGNsYXNzJTNEJTIyY3VzdG9tLWxpbmslMjIlM0UlM0MlMjBQcmV2aW91cyUzQyUyRmElM0UlM0MlMkZidXR0b24lM0UlMEElMEElM0NidXR0b24lMjBvbmNsaWNrJTNEJTIyY3VzdG9tc2Nyb2xsJTI4JTI5JTIyJTNFJTNDYSUyMGhyZWYlM0QlMjIlMjNwaGFzZS0yJTIyJTIwY2xhc3MlM0QlMjJjdXN0b20tbGluayUyMiUzRW5leHQlMjAlM0UlM0MlMkZhJTNFJTNDJTJGYnV0dG9uJTNFJTBBJTBBJTNDJTJGZGl2JTNF

Phase 2: Currency

The phase 2 audit was delivered to the Eco team on April 12th, 2019.

The audited commit is c0d8477866a8667a37f45c85378c5938c84569cd, and the files included in the scope were BeamBalanceStore.sol, ERC223BeamToken.sol, ERC223TokensRecipient.sol, ERC777BeamToken.sol, ERC777Token.sol, ERC777TokensRecipient.sol, and ERC777TokensSender.sol.

Here are our audit assessment and recommendations, in order of importance.

Update: The Eco team made some fixes based on our recommendations. We address below the fixes introduced up to commit af3428020545e3f3ae2f3567b94e1fbc5e5bdb4c of the currency repository.

Critical Severity

No critical issues were found.

 

High Severity

[P2-H01] Broken token approval implementation

High

Contracts inheriting from OpenZeppelin’s ERC20 implementation, such as BeamBalanceStore and ERC223BeamToken, reimplement several inherited ERC20 features (sometimes unnecessarily, as reported in “Unnecessary reimplementation of ERC20 features in ERC223BeamToken” and “Unnecessary reimplementation of ERC20 features in BeamBalanceStore”). This attempts to seamlessly integrate different token interfaces with the generational balance store in BeamBalanceStore. Unexpectedly, these contracts override functionalities related to token approvals, such as the inherited approve and allowance functions. Moreover, both BeamBalanceStore and ERC223BeamToken declare an internal allowances mapping (see BeamBalanceStore at line 94 and ERC223BeamToken at line 22) to independently track token allowances. Both approve and allowance were customized to work with this new allowances mapping.

Besides those already mentioned, two other relevant functions are inherited from the ERC20 contract: increaseAllowance and decreaseAllowance, which are intended to increase and decrease allowances in a way that mitigates the known front-running vulnerability in ERC20 contracts. While both functions are inherited and therefore publicly available in the contracts’ APIs, neither of these two functions are overridden in BeamBalanceStore nor ERC223BeamToken to work with the previously mentioned allowances mapping (as approve and allowance do). Instead, increaseAllowance and decreaseAllowance work with the private _allowed mapping defined in the parent ERC20 contract. This leads to a severe mismatch in how allowances are tracked in the contracts, breaking the token approval feature. As regular Approval events are emitted by these calls, they will seem successful in the eyes of the caller, yet the modification in the allowance will not be reflected when querying the allowance public getter. If users notice this mismatch and thus attempt to use the approve function to increase/decrease token allowances, they will then become vulnerable to the referenced front-running attack.

This issue stems from having the entire token approval mechanism reimplemented in both the BeamBalanceStore and ERC223BeamToken contracts. Consider reassessing the need to redefine such functionality when it is already inherited from a secure, audited, and battle-tested contract such as OpenZeppelin’s ERC20. Should the development team still consider it necessary to adapt the inherited functions, all of them must be carefully and thoroughly tested to avoid severe bugs that can break entire contract features.

Update: Fixed. The ERC223BeamToken contract has been removed. The EcoBalanceStore contract no longer inherits from ERC20. The functions approve and allowance were removed. The allowances mapping was removed. Eco’s statement for this issue:

When we upgraded the OpenZeppelin contract versions that we had been building on top of, we didn’t notice significant changes in the layout of the OpenZeppelin Contracts package. Contracts that used to be interface definitions only were modified to be full implementations. This broke some functionality, and introduced duplicate implementation of others. Our tests have improved since then, and we’re more careful about upgrading dependencies.

[P2-H02] Convoluted implementation of the updateTo function in the BeamBalanceStore contract

High

The function updateTo performs two fundamental tasks related to Beam’s generational store:

  • keeps the balances updated to the latest generation
  • clean the balances for older generations

These two tasks are currently performed in two for loops (see lines 308 and 319 of BeamBalanceStore.sol) that modify token balances

Having two different loops in the function makes it unnecessarily complex, since the functions they perform could be easily encapsulated in helper functions. Moreover, the logic within these loops is tangled enough to render it hard to follow. The lack of inline comments and a detailed specification for the generational store mechanics further hinders the implementation’s assessment. For more specific issues related to the updateTo function, refer to “[P2-M04] Off-by-one error in generation cleaning mechanism”, “[P2-M05] Lack of event emission in updateTo function”, “[P2-L06] Weak condition in cleaning mechanism”, and “[P2-L05] Unclear and undocumented looping algorithm for balance updates”.

Besides addressing these specific implementation issues, consider refactoring the updateTo function by splitting the responsibilities into several helper functions, making sure to include documentation explaining the update and cleaning mechanisms in detail.

Update: Fixed. The updateToCurrentGeneration function has been refactored, cleaned, and commented. However, the function still has two for loops that, while short and properly commented, could be extracted to functions to make things cleaner.

Medium Severity

[P2-M01] Token allowances are tracked in different contracts

Medium

The BeamBalanceStore contract implements a unified generational store for the token balances, which is independent of the interface used to interact with it. Despite currently only working with ERC20, ERC223, and ERC777, the Beam team aims to develop a balance store extensible and flexible enough to handle any other token interface in the future.

Token allowances are not tracked in a single contract as balances are. As in some interfaces, such as ERC777, it does not track allowances by design. The Beam team has avoided centrally tracking token allowances in the BeamBalanceStore contract and instead, has delegated the task to each interface that needs to work with them. While this course of action might be appropriate, some shortcomings must be addressed to effectively implement it.

First of all, the fact that the ERC20 interface is, for no clear reasons, entirely integrated into the BeamBalanceStore contract could confuse users and developers alike. After seeing that the contract’s code implements related functions such as approve, allowance, and an allowances mapping, they might be led to conclude that allowances are indeed centrally tracked in BeamBalanceStore. This would be a mistake, as these functions and data structure are only part of the BeamBalanceStore contract, because the ERC20 interface is integrated within it. A related issue with more specific details regarding the ERC20 implementation is reported in “[P2-M02] Unnecessary reimplementation of ERC20 features in BeamBalanceStore”.

Second of all, there is no documentation regarding how or why token allowances are tracked in separate contracts. As a consequence, it is difficult to understand what the system’s intended behavior is, therefore hindering the assessment of the code’s correctness. Simple and user-friendly documentation concerning how all users are expected to handle allowances should be included both in docstrings and in the repository. In it, it is of utter importance to highlight that allowances given through an interface are not going to be registered in other interfaces.

Lastly, even though the allowances mechanism is inherited from OpenZeppelin’s secure implementation of the ERC20 standard, it is unnecessarily overridden both in BeamBalanceStore and ERC223BeamToken, which leads to a severe bug in the implementation reported in “[P2-H01] Broken token approval implementation”. Other issues related to these points are reported in “[P2-M02] Unnecessary reimplementation of ERC20 features in BeamBalanceStore” and “[P2-M03] Unnecessary reimplementation of ERC20 features in ERC223BeamToken”.

Design decisions always come with trade-offs. In this case, given the fact that some token interfaces do not handle allowances, the Eco development team decided to avoid centrally tracking them, and instead, they delegate that task to each particular interface. While this approach is feasible, it is not the one initially expected after reading about the generational store and how balances are centrally tracked. Consider, after fixing all particular issues in the implementation, raising more end-user awareness about how the system is expected to work by providing extensive documentation and guides on how users should interact with the contracts, in particular, in terms of token allowances.

Update: Fixed. The ERC223BeamToken contract has been removed. The EcoBalanceStore contract no longer inherits from ERC20 and no longer tracks allowances.

[P2-M02] Unnecessary reimplementation of the ERC20 features in BeamBalanceStore

Medium

The BeamBalanceStore contract inherits from OpenZeppelin’s ERC20 implementation contract, unnecessarily redefining the functions approve and allowance. Considering that OpenZeppelin’s contracts are already audited and considered secure implementations of the ERC20 standard, it is never recommended to redefine inherited functions without thorough unit testing and extensive documentation explaining users why the functions are being overridden.

Furthermore, the implementation of all ERC20 features within the BeamBalanceStore contract is not consistent with how other token interfaces (e.g., ERC223BeamToken and ERC777BeamToken) are treated, the latter being split into external contracts. Even though the documentation states, “[The ERC20 interface] is implemented directly in the balance store for simplicity,” we noted during the audit that the loss in consistency and modularization outweighs any potential gain in simplicity.

Hence, it is advisable to refactor the entire implementation of the ERC20 interface out of the BeamBalanceStore contract and implement it separately in a new ERC20BeamToken contract that interacts with BeamBalanceStore, similar to how ERC223BeamToken and ERC777BeamToken currently do. Should the development team not follow this last suggestion, it is advisable to at least remove the unnecessarily re-implemented ERC20 features (i.e., approve and allowance functions) to avoid code repetition and ease the project’s maintainability.

Update: Fixed. The EcoBalanceStore contract no longer inherits from ERC20. A new ERC20EcoToken contract was added to integrate the ERC20 standard with the EcoBalanceStore.

[P2-M03] Unnecessary reimplementation of the ERC20 features in ERC223BeamToken

Medium

The ERC223BeamToken contract inherits from OpenZeppelin’s ERC20 implementation contract, unnecessarily redefining the functions approve and allowance. If these features are not to be modified by the ERC223BeamToken, consider removing them from the contract to avoid code repetition, thus easing the project’s maintainability.

Update: Fixed. The ERC223BeamToken contract has been removed.

[P2-M04] Off-by-one error in the generation cleaning mechanism

Medium

There is an off-by-one error in the updateTo function of the BeamBalanceStore contract that causes the system to keep one generation more than what is expected after executing the cleaning mechanism for older generations. According to the docs, “Old checkpoints (more than 12 generations ago) for the account are cleaned up during the new checkpoint creation to reduce storage requirements.”

However, this statement does not hold true, as the current implementation is keeping an additional generation (i.e., 13) in the state. A unit test confirming the issue can be found in this secret gist.

The lack of additional context in the documentation regarding the purpose of the generational store prevents us from exactly determining the impact and severity of this issue. Consider then properly analyzing its risk and taking the necessary actions to fix the off-by-one error in the updateTo function. More extensive unit tests to increase this function’s coverage are also suggested, which will avoid regression bugs in future changes to the codebase.

Update: Fixed. The pruning loop now keeps only the number of generations declared in the GENERATIONS_TO_KEEP constant.

[P2-M05] Lack of event emission in the updateTo function

Medium

The function updateTo in the BeamBalanceStore contract can be called by any user to update a given address to a specified generation. Under certain circumstances, the function also takes care of cleaning the address’s balances in old generations that are no longer needed by the system. However, it never notifies users about old balances of their accounts being set to zero, which may be totally unexpected if an unaware user queries the balance at a cleaned generation and sees a balance set to zero where it should be positive (see “[P2-M06] balanceAt function allows querying balances of cleaned generations”). The lack of a notifying event further hinders the user’s experience in tracking and understanding how and when the balance got changed to zero.

To improve off-chain client experience when interacting with the BeamBalanceStore contract, consider defining and emitting informative events every time:

  • An address is updated to a more recent generation.
  • The balance of an account in a past generation is set to zero due to the garbage collection mechanism of old generations.

Update: Partially fixed. The AccountBalanceGenerationUpdate event is now emitted when an address is updated to the current generation. No event is emitted when balances from past generations are set to 0. Eco’s statement for this issue:

Emitting events increases gas costs, and the number of generations preserved is a constant relative to the current generation of each address. It’s pretty easy to check which generations have data for a given address, both on-chain and off-chain. For analyzing when a generation was erased, the AccountBalanceGenerationUpdate event can be used as an indicator.

[P2-M06] balanceAt function allows for querying of balances of cleaned generations

Medium

The balanceAt function in the BeamBalanceStore contract allows any user to query the balance of a given account at a specified generation. However, there is no restriction regarding up to which past generation the balances can be queried. For instance, users can currently query their balance at generation 0, which is not even a valid generation. Moreover, after a generation has been cleaned, users not fully aware of the internal garbage collection mechanism of old balances might not expect their balance to be zero at a generation where they used to have a positive token balance. The user experience is further hindered considering that no notifying events are emitted when the balances are set to zero during the garbage collection (as seen in “Lack of event emission in updateTo function”).

As balances of old cleaned generations are no longer relevant for the system (they are set to zero), consider restricting up to which past generation a user can query the balances mapping. In this regard, it is advisable to include a require statement to revert the call to balanceAt function if the specified generation is 0 or has already been cleaned, which would be a more reasonable and user-friendly behavior for this function.

Update: Partially fixed. The balanceAt function still allows querying balances of cleaned generations, but the docstrings have been updated to clearly state the function’s behavior. Eco’s statement for this issue:

Reverting when checking balances of cleaned generations would introduce loud failures elsewhere in the system where they don’t make sense. Previous generations are used for staking, and using an old generation fails in a convenient way – it values the balance at 0 tokens, so participation in voting or staking is not possible. This has the same effect on the user’s actions that a revert would, but does not cause iterative processes to break. Additionally, the implementation of balanceAt is simplified to avoid complex bounds checking that could be a significant source of bugs.

[P2-M07] No indexed parameters in the BeamBalanceStore events

Medium

None of the parameters of the events defined in the BeamBalanceStore contract are indexed. Consider indexing event parameters where appropriate to avoid hindering off-chain clients’ ability to search and filter for specific events.

Update: Fixed. All the events in the EcoBalanceStore contract have indexed parameters.

[P2-M08] Implementation of EIP 777 does not fully match the specification

Medium

The following mismatches between the EIP 777 specification and the related implementation contracts (i.e., ERC777Token and ERC777BeamToken) were identified:

  • The ERC777BeamToken contract does not register the interface with its own address via the ERC1820 registry deployed at an address specified here, which is strictly required by the EIP. According to the spec, this must be done by calling the setInterfaceImplementer function in the registry with the token contract address as both the address and the implementer and the keccak256 hash of ERC777Token as the interface hash.
  • The function defaultOperators() external view returns (address[] memory) is not defined in ERC777Token or in ERC777BeamToken, and it is considered a must by the specification. According to the EIP, if the token contract does not have any default operators, this function must still be included and return an empty list.
  • Neither ERC777Token nor ERC777BeamToken define the burn(uint256, bytes) and operatorBurn(address, uint256, bytes, bytes) functions, which are a must according to the EIP’s spec. If no burning functionality is needed in the implementation contract (i.e., in ERC777BeamToken), the recommended course of action would be to still define the missing functions and revert all calls to them with an informative error message (Note, however, that the error message in line 168 of ERC777BeamToken.sol does refer to a burn feature, as reported in the issue “Confusing error message in ERC777BeamToken contract”.).
  • The defined Minted event is missing one bytes argument. In other words, it is defined as Minted(address indexed operator, address indexed to, uint256 amount, bytes operatorData); but instead should be Minted(address indexed operator, address indexed to, uint256 amount, bytes data, bytes operatorData)). It is worth mentioning that this event is never actually used in the ERC777BeamToken contract.

While these particular noncompliances were detected during the audit, the development team must bear in mind that the EIP 777 is still under discussion and can therefore suffer breaking changes at any moment. Hence, it is highly advisable for the Beam team to closely follow the EIP’s progress so as to implement any future changes that the proposed interface may suffer. As another reference, consider following the development of PR #1684 in the OpenZeppelin library.

Update: Partially fixed. The ERC777Token contract was replaced with the IERC777 interface from OpenZeppelin Contracts. The ERC777EcoToken contract is still not registering itself in the ERC1820 registry. The defaultOperators function was added, and it is returning an empty list. The functions burn and operatorBurn were added. The Minted event is now properly defined (imported from the OpenZeppelin Contracts IERC777 interface). Eco’s statement for this issue:

We register the ERC777 interface with the ERC1820 registry as part of our deployment process rather than in the ERC777 EcoToken implementation. See fusedInit in the PolicyInit contract, and its use in tools/deploy.js.

[P2-M09] Receiver contract is not notified in transferFrom function of the ERC223BeamToken contract

Medium

The ERC223BeamToken contract reimplements the ERC20 transferFrom function, adding the necessary logic to effectively transfer the tokens by calling the BeamBalanceStore contract. Nonetheless, the transferFrom function never checks if the receiver address is a contract to later call its tokenFallback function, as the transfer function correctly does (following the EIP 223 specification).

Similar to what is already implemented in the transfer function, consider implementing the necessary logic to notify the receiver contract about the token transfer when using the transferFrom function. Even though this function is not currently part of the interface proposed in the EIP 223 (so there is no standard expected behavior), failing to notify the receiver contract goes against the EIP’s original intention. Alternatively, consider removing the transferFrom function altogether to conform to the current state of the EIP.

Update: Fixed. The ERC223BeamToken contract has been removed.

[P2-M10] BeamBalanceStore’s initialize function lacks the onlyConstruction modifier

Medium

The initialize function of the BeamBalanceStore contract is missing the onlyConstruction modifier. While this issue does not pose a security risk, as the parent contract’s initialize function does include this modifier (making any transaction to the child’s function revert when called more than once), no unit tests covering this sensitive scenario were found in the test suite.

Consider including the onlyConstruction modifier in the mentioned function to favor explicitness. Additionally, given how critical this function is, thorough unit tests covering the behavior of the initialize function of the BeamBalanceStore contract should be included, making sure it is impossible for anyone to call it more than once.

Update: Fixed. The initialize function now has the onlyConstruction modifier. Unit tests covering calls to the initialize function of the EcoBalanceStore contract have been added.

Low Severity

[P2-L01] Not following the Check-Effects-Interaction Pattern

Low

Solidity recommends the usage of the Check-Effects-Interaction Pattern to avoid potential security vulnerabilities, such as reentrancy. However, the transferFrom function of the ERC223BeamToken contract executes an external call to do the token transfer before modifying the storage to reduce the caller’s allowance. Had the call been made to an unknown contract, this pattern would have led to a severe reentrancy vulnerability.

In this particular case, there is no actual risk of a reentrancy attack, as the external call is made to a trusted contract (i.e., BeamBalanceStore). Always consider following the Check-Effects-Interactions pattern, thus modifying the contract’s state before making any external call to other contracts.

Update: Fixed. The ERC223BeamToken contract has been removed.

[P2-L02] Erroneous emission of the ERC20 Transfer event

Low

Authorized token contracts, such as ERC777BeamToken and ERC223BeamToken, are allowed to transfer tokens registered in the BeamBalanceStore contract by calling its tokenTransfer function, which in turn, calls the internal tokenTransferHelper function. After transferring the tokens, this last function emits two Transfer events. While the first Transfer event is defined in the BeamBalanceStore contract, the second one is the inherited ERC20 Transfer event. This means that for every single transfer triggered by any of the different interfaces allowed to interact with BeamBalanceStore, an ERC20 Transfer event will be emitted, but it will be erroneous if the original call was not made to an ERC20 function.

Docstrings for the tokenTransfer function further hinder discerning the intended behavior, as they state, “A Transfer event must be emitted for any transfer made […].” However, it is never specified which Transfer event in particular is expected to be emitted. Additionally, related unit tests only check for the emission of a single Transfer event.

As this unexpected behavior might be misleading for external off-chain clients tracking token transactions, consider only emitting the ERC20 Transfer event in the ERC20 transfer and transferFrom functions.

Update: Fixed. The tokenTransfer function no longer emits Transfer events.

[P2-L03] Redundant balance getter functions in the BeamBalanceStore contract

Low

In the BeamBalanceStore contract, there are two public functions to return an address’s token balance: balance and balanceOf. Given balanceOf internally calls balance, consider restricting balance‘s visibility to internal, leaving balanceOf as the only public getter to retrieve the balance of an address. Should this suggestion be applied, functions balanceOf in ERC223BeamToken and ERC777BeamToken need to be updated accordingly, along with all related unit tests.

Alternatively, if the ERC20 interface is finally moved out of the BeamBalanceStore contract, as is strongly suggested in “Unnecessary reimplementation of ERC20 features in BeamBalanceStore”, then only the balance function should be kept in BeamBalanceStore (as a public or external function) to be used by the rest of the contracts to query the token balances registered in BeamBalanceStore.

Update: Fixed. The balanceOf function was removed.

[P2-L04] Repeated initialization code in the BeamBalanceStore contract

Low

The BeamBalanceStore contract is set up during construction with an initial configuration that defines which policies are allowed to interact with sensitive functions of the contract. This is done by pushing the IDs of three different policies to the policies array. As BeamBalanceStore is an upgradeable contract, it also features an initialize function that is to be called after construction, via a proxy, to effectively initialize the proxy’s storage by copying the configuration set during the implementation contract’s construction. The initialize function initializes policies in the exact same way as the constructor, repeating the code used to push the three initial policies.

Given how error-prone this approach is, consider refactoring the repeated code into a private function that encapsulates the initialization of all policies required during the initial setup of the BeamBalanceStore contract.

Update: Fixed. The configureDefaultAuthorizedContracts function was added, and now, it is called by the constructor and the initialize function.

[P2-L05] Unclear and undocumented looping algorithm for the balance updates

Low

The function updateTo in the BeamBalanceStore contract aims at updating the balance of a given address to a specific generation. It also cleans the balances for older generations.

The documentation does not describe how the update mechanism is to be performed, but the goal seems to promote the balances of the last available balance for the _owner (referred by the variable last) to its future generations (up to _targetGeneration). This is done in the loop in lines 308-310 which is not documented, making it difficult to analyze. In particular, the loop ends up assigning the same value (i.e., the last available balance) to all subsequent balances, even if it takes that value from a different variable in each iteration.

Consider documenting how the updateTo function should update the balances and include inline comments to clearly describe the intended behavior. If this is indeed replicating the same value throughout the array, consider simplifying the logic to ease readability.

Update: Fixed. The updateToCurrentGeneration function has been refactored, cleaned, and commented.

[P2-L06] Weak condition in the cleaning mechanism

Low

The function updateTo in the BeamBalanceStore contract aims at updating the balance of a given address to a specific generation. It also intends to clean the balances for old generations, always keeping up to 12 past generations.

The cleaning process is guarded by an if statement that checks if the specified target generation is greater than generationMinimumKeep (set to 12 during construction). When the number of generations becomes greater than generationMinimumKeep, the if condition will always be true, meaning that the logic including the cleaning mechanism will be executed every time.

Consider improving the referenced if condition (which can potentially lead to gas savings), along with the changes proposed in the related issue on updateTo‘s complexity (see “Convoluted implementation of updateTo”).

Update: Fixed. The updateToCurrentGeneration function has been refactored and the conditions for cleaning improved.

[P2-L07] Complex and potentially inefficient authorization mechanism

Low

The BeamBalanceStore contract restricts some of its functionality (e.g., the tokenTransfer function) to a set of authorized contracts. To do so, it relies on the authorizedContracts mapping which is built out of the policies array. In order to keep both variables synchronized, the reAuthorize function is intended to remove all elements from the mapping and recompute it from scratch by reading the information from the policies array. reAuthorize must be called each time a policy is authorized (via authorize) or revoked (via revoke). Each time one policy is added or removed, the whole authorization mapping is then entirely rebuilt.

Besides the fact that this approach could be quite inefficient if authorize and revoke are frequently called, the purposes of state variable policies and authorizedContracts seem to be too overlapped, which leads to the need to always keep them in sync. It appears, however, that the functions authorize and revoke only add and remove one policy at a time. In this setting, it may be possible to update the authorizedContracts mapping directly without completely rebuilding it. This could be done by resorting to the policyFor function, as in line 460 of the reAuthorize function. Given a policy p, the function policyFor(p) can be used to obtain the contract’s address c and update authorizedContracts[c] with true or false accordingly. Using this approach, the array authorizedContractsKeys would become pointless.

Consider either making the authorization mechanism more efficient or documenting the rationale behind the current implementation (e.g., policies are rarely authorized or revoked once the contract is initialized).

Update: Fixed. The authorization mechanism has been simplified and now only relies on the authorizedContracts and authorizedContractAddresses arrays.

[P2-L08] The evoke function should be better modularized

Low

The revoke function of the BeamBalanceStore implements all the necessary business logic to search for a given policy identifier as well as remove it from the policies array when found. Considering the entire operation is currently done in convoluted nested loops, without inline documentation explaining what each code segment is actually doing, the function may benefit from some refactoring and modularization into more decoupled private functions. For instance, functions for searching and deleting a policy could be implemented separately and called from revoke. This should improve the code’s readability, thereby easing its documentation, testability, and maintenance.

Update: Fixed. The revoke function has been refactored and is now more readable.

[L2-09] The revoke function may not inform the user of a failed operation

Low

The revoke function of the BeamBalanceStore contract is in charge of finding and removing a given policy from the policies array. However, the function does not implement the necessary logic to handle a scenario where no policy is revoked. In such cases, the transaction will successfully be completed without explicitly notifying the sender that the policy identifier provided is not registered and was therefore not removed.

Consider adding the needed require statement to revert the transaction and explicitly notify the sender with an informative error message when it is impossible to revoke a given policy identifier.

Update: Fixed. Now, when the policy is not revoked, the function reverts.

[P2-L10] Redundant deletion of the array’s element in the revoke function

Low

The revoke function of the BeamBalanceStore contract is in charge of finding and removing a given policy from the policies array. When the policy is found, a loop takes care of moving the tail of the array one step forward, thus successfully removing the target policy by overriding it. As all elements are moved one position, the last element of the array is then set to zero before decreasing the array’s length by one.

These last two instructions are redundant, since just decreasing the array’s length will suffice. Therefore, consider removing the instruction that zeroes the last element in the array.

Update: Fixed. The revoke function now only decreases the array’s length.

[P2-L11] A potentially inefficient mechanism for revoking policies

Low

The function revoke of the BeamBalanceStore contract removes all occurrences of policies matching a given _policyIdentifier. In order to do so, the function features two loops. The first compares the provided _policyIdentifier with the elements in the policies array. The second one, nested inside the first, overrides the matching element by moving all the following elements one position, thereby removing the target policy.

In a scenario where a _policyIdentifier appears several times in the policies array, the implemented algorithm for removing policies can be quite expensive in terms of gas costs, essentially due to the described nested loops. The worst scenario is in the order of policy.length * R where R is the number of times the element to be revoked appears.

If appropriate, consider either disallowing duplicate policies when registering them via the authorize function or providing a more efficient implementation for the revoke function. As a mere illustration of a plausible approach, consider this draft as an alternative version of revoke, which is linear on policy.length, even in the case of repeated policies (Note that this suggestion is only a proof of concept and should not be used in production under any circumstances).

Update: Fixed. Now, the authorize function reverts if the policy has been authorized. The revoke function is now simpler, ending the loop after the first policy is found.

[P2-L12] Potentially unnecessary extra iterations in the revoke function

Low

The revoke function in the BeamBalanceStore contract allows the root policy to revoke access privileges that were granted to other contracts (whose addresses are stored in the authorizedContracts mapping) by providing the identifier of the policy contract to be removed. Internally, the function loops through all registered policies in the policies array, reorganizing the elements left in the array after finding and removing the target policy. However, it currently does not break from the loop once the policy is found and deleted; instead, the function unnecessarily keeps iterating over the array.

As each iteration increases the gas cost of the transaction, consider adding a break statement right after the revoked local variable is set to true. This issue should be disregarded if the policies array can contain repeated policies. Consider documenting it in the function’s docstrings if this was indeed the case.

Update: Fixed. Now the authorize function reverts if the policy has been authorized. The revoke function is now simpler, ending the loop after the first policy is found.

[P2-L13] The total token supply is not tracked across generations

Low

The generational balance store implemented in the BeamBalanceStore contract does not track the total token supply across generations. Instead, the token supply registered in the tokenSupply state variable always refers to the latest generation. If this is the intended behavior of the balance store, consider properly documenting it. Otherwise, consider implementing the necessary logic to track the total token supply across all generations.

Update: Fixed. The behavior has been clearly documented.

[P2-L14] The EIP 820 implementation should be updated to EIP 1820

Low

Considering that EIP 1820 has recently superseded EIP 820, the former being the latter’s adaptation for Solidity 0.5, it is advisable to upgrade all references to EIP 820 in ERC777BeamToken and the README with the newer EIP 1820. Although entirely out of scope for this audit, it was observed that this work has already begun in https://github.com/BeamNetwork/currency/pull/39.

Update: Fixed. The Eco project is now using the EIP 1820.

[P2-L15] Confusing docstrings for the granularity function in the ERC777BeamToken contract

Low

Docstrings for the granularity function of the ERC777BeamToken contract are phrased as a question, which may be confusing for users and developers alike. Consider rephrasing them as a clear and straightforward statement, such as Return the smallest unit of this token that can be transferred.

Update: Fixed. The docstring of the granularity function is now clearer.

[P2-L16] Confusing error message in the ERC777BeamToken contract

Low

In the ERC777BeamToken contract, the error message in line 168 should be clarified to better inform users about the specific failed condition that causes the transaction to revert (e.g., “Recipient cannot be the zero address”). Moreover, it points the user to use a burn feature not implemented in the ERC777BeamToken contract, which may be confusing.

Update: Fixed. The revert message has been updated.

[P2-L17] Incomplete API documentation

Low

The README.md file includes a section where the public API of the BeamBalanceStore contract is documented. However, public functions tokenTransfer, balance, initialize, destruct, and reAuthorize are not included. As these functions are part of the public API of the BeamBalanceStore contract, consider adding them to the documentation.

Update: Fixed. The API documentation in the README file now includes the mentioned functions.

[P2-L18] Outdated solc version in use

Low

An outdated solc version, 0.5.4, is currently in use. As Solidity is now under a fast release cycle, make sure that the latest version of the compiler is being used at the time of deployment (presently 0.5.7).

Update: Fixed. Eco now uses Solidity 0.5.12.

Notes

  • The current implementation found in the BeamBalanceStore contract does not call the reAuthorize function to populate the authorizedContracts mapping after initial policies are set in the constructor and initialize functions. The Eco team confirmed this is the functions’ intended behavior, as the reAuthorize function is called from off-chain scripts that handle the initial deployment. Nonetheless, it is advisable to include inline documentation in the functions that clearly states this, which will avoid confusion in developers and auditors.
    Update: Fixed. Notes have been added to the docstrings of the constructor and initialize functions.
  • In line 57 of BeamBalanceStore.sol, there is a confusing reference to “authorizedPolicies” which likely refers to the policies array instead. Consider fixing it or clarifying its meaning.
    Update: Fixed. The authorizedContracts mapping was removed.
  • As it may be difficult for regular users to understand the balanceAt function’s intended behavior from its docstrings, they may greatly benefit from simpler and more straightforward phrasing.
    Update: Fixed. The docstring of the balanceAt function is now clearer.
  • There is an unclear error message in line 270 of BeamBalanceStore.sol that reads, “Source account must have at least enough tokens.” Consider rephrasing and clarifying it.
    Update: Fixed. The error message is now clearer.
  • In line 329 of BeamBalanceStore.sol, consider calling the isUpdated function to avoid code repetition and improve readability.
    Update: Fixed.
  • The function isAuthorized determines whether a contract address is authorized to operate with the BeamBalanceStore by looking at the authorizedContracts mapping. There is also a modifier restricted that checks for authorization by looking directly at the authorizedContracts mapping. Consider making the function isAuthorized public and reusing it in the modifier in order to avoid code duplication.
    Update: Fixed. The restricted modifier was removed.
  • In the BeamBalanceStore contract, consider clearly documenting what the exact intended relationship between authorizedContracts and policies is, as both state variables are deeply related (e.g., for each p in policies, there is a contract c such that authorizedContracts[c] and c == policies[policyFor(p)]).
    Update: Fixed. The policies variable was removed.
  • State variables generationForAddress, cleanedForAddress, and balances in the BeamBalanceStore contract are highly related. Therefore, it is of utter importance for the contract to keep consistency among its values. It is thus advisable to clearly describe and document some of the most relevant constraints governing these variables. For instance, balances[_owner] should be 0 for the generations ranging from 0 (or 1) to cleanedForAddress[_owner], cleanedForAddress[_owner] always be less than or equal to generationForAddress[_owner], and the latter always less than or equal to generation.
    Update: Fixed. Constraints are now clearly documented in docstrings (see lines 87 to 102 and 105 to 114).
  • There is a misleading inline comment describing how the value set in the state variable generationDuration is calculated. While it reads 1/12th of 365.25 days, the actual value set is 1/12 * 365.25 * 24 * 3600. Consider rephrasing this comment to avoid mismatches between documentation and implementation.
    Update: Fixed. The comment was removed and now the magic value has a comment explaining where it comes from.
  • In the BeamBalanceStore contract, consider documenting the time units in which the duration of a generation is measured with an inline comment next to the generationDuration state variable .
    Update: Fixed.
  • In the BeamBalanceStore contract, seeing as how the state variable generationDuration is only set during construction and is not intended to be modified, consider declaring it as constant to prevent functions from inadvertently modifying it in future changes to the codebase.
    Update: Fixed.
  • The BeamBalanceStore contract currently has two different functions to update an account to a more recent generation: update(address) and updateTo(address,uint256), the former just internally calling the latter to update the specified address to the latest generation. For simplicity, unless there is another reason to update an address other than updating it to the most recent generation, consider removing the updateTo function from the contract’s public API, thereby restricting its visibility to private.
    Update: Fixed.
  • The function incrementGeneration in the BeamBalanceStore contract increments by one the value of the generation state variable and updates the generationTimestamp accordingly by adding the generation duration. Additionally, the function can only be called if the generation has finished (i.e., the current time is greater than the sum of the last generation timestamp and the generation duration). If the system is not updated for some time, several calls to the incrementGeneration function will be required until the timestamp for the generation is in sync with the block time. Should this be the expected behavior, consider documenting it.
    Update: A comment was added.
  • In the BeamBalanceStore contract, consider restricting the tokenSupply public state variable to private and using the already defined totalSupply getter, so as to avoid having two public functions behaving in exactly the same way.
    Update: Fixed. The totalSupply function was removed.
  • To favor explicitness and readability, the following renaming is suggested.
    • In BeamBalanceStore:
      • the updateTo function to updateToGeneration
      • the update function to updateToCurrentGeneration
      • the generation state variable to currentGeneration
      • the generationTimestamp state variable could be renamed to currentGenerationTimestamp
      • generationMinimumKeep to generationsToKeep
        Update: Some of the variables and functions were renamed.
  • The function isContract appears both in ERC223BeamToken and ERC777BeamToken contracts. Both contracts import libraries from OpenZeppelin. Note that OpenZeppelin already provides the function isContract with the desired functionality. Therefore, consider using the function isContract from OpenZeppelin to avoid duplicates, making the code easier to read and maintain.
    Update: Partially fixed. The ERC223BeamToken contract was removed. However, the ERC777EcoToken contract still has the isContract function.
  • In the ERC777BeamToken contract, the import for ERC820ImplementerInterface.sol is never used. Moreover, while the SafeMath library is imported and used for the uint256 type, its functions are never called. Consider removing all unnecessary imports to favor readability and avoid confusions.
    Update: Partially fixed. The SafeMath import was removed, but the ERC1820ImplementerInterface is still imported and unused.
  • Several docstrings do not follow the Ethereum Natural Specification Format (e.g., all docstrings of the functions in the ERC777BeamToken contract). Consider following this specification across the entire codebase on everything that is part of the contracts’ public APIs.
    Update: Not fixed.
  • Consider prepending all private and internal functions with an underscore (see tokenTransferHelper, doSend, callSender, callRecipient, isContract, and getStore), so as to explicitly denote their restricted visibility and favor readability.
    Update: Not fixed. In Eco’s words: “We develop against our own internal style guide, which does not prefix private or internal functions with underscores.”
  • To keep a consistent code style across the entire codebase, consider removing the underscore from the event parameter _contract in events Authorized and Revoked of the BeamBalanceStore contract.
    Update: Fixed. The parameters in Authorized and Revoked no longer have the underscore.
  • To favor explicitness, consider declaring the visibility of all contract state variables (see policies, authorizedContracts, authorizedContractKeys, balances, generationForAddress, cleanedForAddress, and allowances).
    Update: Fixed. All the state variables in the EcoBalanceStore contract now have the visibility declared.
  • The contract ERC777Token in ERC777Token.sol should be refactored into an interface, while changing the contract’s name to IERC777Token to better denote it is simply an interface and not the actual implementation. Similarly, the interfaces defined in ERC777TokensRecipient.sol, ERC777TokensSender.sol, and ERC233TokenRecipient.sol should be renamed to IERC777TokensRecipient, IERC777TokensSender, and IERC223TokensRecipient, respectively, making sure these suggested changes are also reflected in the files’ names.
    Update: Fixed. The ERC223TokenReceipient contract was removed. The ERC777 contracts were replaced by the interfaces from OpenZeppelin Contracts.
  • As exemplified in lines 92–94 of ERC223BeamToken.sol, the style for multi-line arguments is line breaking after the opening parenthesis but not breaking before the closing one. Although this style was consistently seen throughout the entire codebase, it embodies a minor deviation from the Solidity style guide. Consider following Solidity’s coding style guide, which can be enforced across the entire project by means of a linter tool, such as Solhint.
    Update: Fixed. Now the code style breaks after the closing parenthesis.
  • Diagrams included in the README.md file do not exactly match the contracts’ code. In particular, while diagrams state that all contracts include a kill public function, this function was not found in any of them. Consider fixing this documentation mismatch, renaming the kill function to destruct (which is the implemented function that the documentation presumably refers to).
    Update: Fixed.
  • Consider fixing the grammar in the “Usage” section of the README file, replacing interfaces are providing conforming to ERC223 and ERC777 with interfaces conforming to ERC223 and ERC777 are provided.
    Update: Fixed. Grammar in the currency README has been corrected.

JTNDZGl2JTIwY2xhc3MlM0QlMjJidG4tY29udGFpbmVyJTIyJTNFJTBBJTBBJTNDYnV0dG9uJTIwb25jbGljayUzRCUyMmN1c3RvbXNjcm9sbCUyOCUyOSUyMiUzRSUzQ2ElMjBocmVmJTNEJTIyJTIzcGhhc2UtMSUyMiUyMGNsYXNzJTNEJTIyY3VzdG9tLWxpbmslMjIlM0UlM0MlMjBQcmV2aW91cyUzQyUyRmElM0UlM0MlMkZidXR0b24lM0UlMEElMEElM0NidXR0b24lMjBvbmNsaWNrJTNEJTIyY3VzdG9tc2Nyb2xsJTI4JTI5JTIyJTNFJTNDYSUyMGhyZWYlM0QlMjIlMjNwaGFzZS0zJTIyJTIwY2xhc3MlM0QlMjJjdXN0b20tbGluayUyMiUzRW5leHQlMjAlM0UlM0MlMkZhJTNFJTNDJTJGYnV0dG9uJTNFJTBBJTBBJTNDJTJGZGl2JTNF

Phase 3: Governance

The phase 3 audit was delivered to the Eco team on June 14th, 2019.

The audited commit is 51b65c5c7af455391af2bc30d13d761566d8c236, and the files included in the scope were CurrencyGovernance.sol, DepositCertificates.sol, Inflation.sol, PolicyProposals.sol, PolicyVotes.sol, Proposal.sol, SimplePolicySetter.sol, TimedPolicies.sol, and TrustedNodes.sol.

Here are our audit assessment and recommendations, in order of importance.

Update: The Eco team made some fixes based on our recommendations. We address below the fixes introduced up to commit af3428020545e3f3ae2f3567b94e1fbc5e5bdb4c of the currency repository.

Critical Severity

[P3-C01] Funds can be lost

Critical

Any token holder can call the registerProposal function of the PolicyProposals contract to register a proposal address. There is a token cost per registration, which can be partially refunded with the refund function if the proposal does not make the ballot.

However, the guard conditions intended to avoid duplicate proposal registrations or prevent refund requests for ineligible proposals do not apply to the zero address. This has a number of consequences.

Each time the zero address is registered as a proposal, it will overwrite the proposer address, add a new item to the allProposals array, increment totalproposals, and emit a new ProposalAdded event. This will cause allProposals and totalproposals to return incorrect values.

Interestingly, this would also prevent totalproposals from being decremented to zero, which would prevent the contract from destructing, as long as the refund function did not have the same bug.

If the zero address proposal is registered, it can be refunded like any other proposal that did not make the ballot. Subsequently (or if it was never registered), calls to refund the zero address will decrement the totalproposals variable and send REFUND_IF_LOST tokens to the zero address.

This will cause the totalproposals variable to return the wrong value when queried. Additionally, each call to refund reduces the contract balance, and it may not have enough funds to honor all refunds, causing some legitimate refund requests to fail. Alternatively, if totalproposals is decremented to zero, anyone can destruct the contract before everyone has received their refunds. Lastly, totalproposals can be decremented past zero, causing it to underflow and prevent destruct from ever being called.

Consider preventing registerProposal and refund from being called with the zero address.

Update: Fixed. The registerProposal and the refund functions now require that the address passed as an argument is not 0.

[P3-C02] Any token holder can prevent currency governance

Critical

The CurrencyGovernance contract oversees a governance process that may culminate in the deployment of an Inflation contract or a DepositCertificates contract.

In the first case, after inflation tokens are minted and assigned to the Inflation contract, startInflation confirms the contract token balance exactly matches the expected value. Similarly, in the second case, after interest tokens are minted and assigned to the DepositCertificates contract, startSale confirms the contract token balance exactly matches the expected value.

However, either contract would be deployed to a predictable address. This makes it possible for any token holder to pre-compute the contract address and transfer tokens to the contract before it is deployed. Consequently, when it is initialized after deployment, it will have an unexpectedly high balance, and the transaction will be reverted. This effectively means that any token holder can prevent the CurrencyGovernance contract from deploying new Inflation or DepositCertificates contracts.

Consider changing the guard condition to set a minimum (but no maximum) bound on the contract balance.

Update: Fixed. The startInflation and startSale functions now check for a balance greater than or equal to the required.

[P3-C03] Inflation parameters are miscalculated

Critical

The computeVote function of the CurrencyGovernance contract can be invoked to finalize the voting procedure. In the case where there are more votes for inflation than deflation, the function should select the median amount of inflation and the median prize from the non-zero inflation votes. It does this by requiring the user to sort the array of voter addresses by their inflation votes (implicitly creating a sorted array of inflation votes) and separately by their prize votes (implicitly creating a sorted array of prize votes) and then, by selecting the middle of the non-zero elements in the implicit array.

If there is an even number of non-zero elements, it is supposed to average the middle two. However, the middle index is miscalculated. Specifically, it is set to half the number of non-zero elements, but it is not offset into the non-zero elements section of the array.

This means that inflation and prize will be the average of two elements that are too low (and possibly zero) and will not reflect the results of the vote. Consider moving the offset operation from CurrencyGovernance (line 360) out of the if statement (line 358) to correctly calculate the middle index.

Update: Fixed. The initiateInflationCycle function now correctly offsets the middle index.

[P3-C04] Miscalculation of claimed interest

Critical

The DepositCertificates contract maintains a public claimedInterest variable that tracks the total amount of interest that has been issued by the contract.

Whenever a user invokes the deposit function to purchase a deposit certificate, only the newly issued interest should be added to claimedInterest. Instead, the total interest issued to the user by the contract is added, which effectively counts previously issued interest multiple times. This means that whenever a user buys certificates over multiple transactions, the public claimedInterest value will be incorrect.

In addition, claimedInterest is used in the destruct function to determine whether all issued and locked funds have been withdrawn. Since it will be too high if the bug is triggered, the contract will be unable to burn its tokens and will self destruct.

Consider updating the deposit function to add only the newly issued interest to claimedInterest.

Update: Fixed. The deposit function now adds only the unclaimed interest.

High Severity

[P3-H01] Incorrect currency vote result

High

The computeVote function in the CurrencyGovernance contract contains a loop to calculate the number of zero inflation votes and zero certificate votes. These values are later compared with the total number of revealed votes in order to calculate the number of non-zero inflation and certificate votes.

It does this by requiring the user to sort the array of voter addresses by their inflation votes (implicitly creating a sorted array of inflation votes) and by their certificate votes (implicitly creating a sorted array of certificate votes). It then cycles through both implicit lists in order, updating the number of seen zero votes in each iteration, stopping at the second to last element. This means that if either implicit list contains only zero votes, the count will be one less than it should be.

In most cases, this has no effect, because inflation votes are anti-correlated with deflation votes. Additionally, when there are exclusively zero votes on one side, only the other side is used in subsequent calculations. However, relying on these facts about the current code base makes it fragile to changes.

More importantly, it is possible for a voter to select zero for both inflation and certificates. Consider a vote with exactly one non-zero ballot for one of the parameters and at least one zero vote for both parameters (and no other votes). This should resolve in favor of the non-zero ballot; in fact, it resolves as a tie.

Consider updating the algorithm to correctly count the number of zero votes in this scenario.

Update: Fixed. A patch was added to cover the cases when the last value of the array is 0. Note, however, that the function is still big and hard to read.

[P3-H02] Executed policy proposals have full control over the system

High

The Eco system is built from a registry of policy contracts. Every 40 days, a voting over policy proposals can take place. The voting has two staking phases. At the end of the voting, 3 proposals can be enacted if they have more stake than the no-confidence vote and more than 3/4 of the total staked. When a proposal is enacted, it will immediately replace one of the policy contracts, and it can only be removed following the same voting procedure.

This means that a new contract can take full control over a part of the system functionality. For example, the new enacted proposal could add or remove trusted nodes for the monetary vote, it could change the rules or frequency of the votes, or it could completely replace the token.

It is expected that the token holders will not put their stake on proposals that will break the system. But humans are known for making bad decisions collectively once in a while. And even if the proposals are extensively discussed, votes carefully thought out, and many people voting for what appears to be a good decision out of the wisdom of the crowd, it is possible for the proposal to have issues that will have unintended consequences that nobody noted until they were enacted.

Registering a proposal for voting requires spending a lot of tokens, but anybody who can get that amount of tokens can register one. In addition, all the token holders will be able to stake in favor of proposals. This is a very interesting and radical approach for transparent and decentralized governance. However, there is a lot of risk in allowing the token holders to decide directly over the execution of all the functions of the system.

Consider adding the role of trusted auditors and adding an extra phase to the policy proposal process to allow the auditors to review the proposed contracts. The auditors would not have any control over the results of the vote. They would just review that the contracts do exactly what the proposers intend them to do — that there are no bugs and that they will not break the Eco system. After a successful audit, the proposal can be whitelisted, and only whitelisted proposals should be enacted.

Update: Not fixed. Eco’s statement for this issue:

In order to reduce the risks inherent in the policy proposals process, we’ve reduced the number of proposals that can be enacted in a given voting cycle from 3 to 1. This helps ensure that proposals do not conflict with each other – if multiple changes should be made at the same time, they need to be combined into a single proposal covering all of the changes to make in the voting cycle. We decided not to place any further restrictions on the process, because we don’t want to constrain the possible future directions ECO stakeholders may take the currency after launch.
We considered the creation of a trusted auditor role as suggested in the report, but came to the conclusion that this sort of arrangement is better handled off-chain. By enforcing the auditor role on-chain, we would introduce the challenges of managing which auditors are trusted using the governance process itself. We would have to rely on the auditor to approve a proposal that replaces the auditor, which is more than a small conflict of interest.
Instead, we rely on our community to demand an audit, and vote down any proposal that has not been thoroughly audited by someone they trust.

 

Medium Severity

[P3-M01] The proposal registration fee is staked

Medium

When the registerProposal function of the PolicyProposals contract is called, a registration fee is transferred to the contract.

The fee is also added to the total stake supporting the proposal. This is confusing in two ways. Firstly, the proposal’s staked mapping is not updated, thereby creating a situation where there are staked tokens not assigned to anybody in particular. Secondly, if the proposer decides to support their proposal, they will stake the tokens from their balance at the contract’s generation, which may include the tokens they already staked as part of the registration fee.

Whether or not this is considered a bias in the result depends on if the registration fee is intended to be taken from the staked amount. If so, some proposers are double staking the tokens used to pay the registration fee, while others are staking tokens that they did not have at the contract’s generation. On the other hand, if the registration fee is intended simply as a deterrent against ill willed or spam proposals, it should not be treated as part of the stake.

In the first case, consider confirming the proposer had enough tokens in the contract’s generation before accepting the fee in the current generation. Also ensure that the support function does not add tokens that were part of the registration fee.

In the second case, consider setting the proposal’s initial stake to the proposer’s balance at the contract’s generation and updating the proposal’s staked mapping accordingly. Alternatively, to retain the option of the proposer choosing not to support their proposal, consider leaving the proposal’s initial stake at zero.

Update: Fixed. The registerProposal function now leaves the initial stake at zero.

[P3-M02] The non-refunded tokens are not transferred

Medium

In the PolicyProposals contract, registering proposals requires transferring tokens to this contract. Then, up to 3 proposals are selected to go to a second staking phase. The proposers of the unselected ones can get a partial refund.

It is not clear what should happen to the tokens that cannot be refunded (i.e., the ones corresponding to the registration of the selected proposals and what remains after the refunds are processed). They are just held by the PolicyProposals contract, until it is destroyed, and then, they are locked forever.

Consider transferring these tokens after the top proposals are selected. If they should be locked forever, consider explicitly signalling this by transferring them to the 0 address.

Update: Fixed. The destruct function now transfers the tokens to the policy contract. Note, however, that this behavior is not documented. It is not clear what happens to the tokens owned by the policy: Are they now owned by the Eco team? How can the policy contract transfer or use those tokens? Because these details might be unexpected or sensitive for some users, consider documenting them as explicitly as possible. Also, note that the transfer function could fail, and the contract would still be destroyed.

[P3-M03] Lack of input validation

Medium

In the SimplePolicySetter contract, the set function is used to set the ERC20 key and address value that will update the system to use a new implementation contract.

This function does not verify that the key and address arguments passed are not 0, which in almost every case will be wrong values. Also, the docstring of the function says that it can only be called once, but without validation it can be called with arguments set to zero multiple times.

Consider validating the arguments in this very sensitive function.

Update: Partially fixed. The set function now requires the _key argument to be different to 0. However, the _value argument can still be 0. Eco’s statement for this issue:

Allowing 0 as a _value argument here is necessary to allow us to unset the value. We use this throughout our code to grant temporary privileges. User-provided values should always be sanitized before passing them to a SimplePolicySetter call to prevent significant security issues.

[P3-M04] The function that computes votes is too long

Medium

The computeVote function in the CurrencyGovernance contract is almost 200 lines long.

There are too many statements in this function covering many different tasks, making it very hard to read and very prone to errors if it is changed in the future. It is the source of multiple issues found in this audit.

Consider splitting this function into many smaller private functions with intent-revealing names. This would increase the cost of calling this already expensive function, but it is important in a function so sensitive as this one.

If the cost increases are considered prohibitive, try to find other ways to reduce the size of the function like separating it into different transactions, or at the very least, document the limitations that make the function so long.

Update: Not fixed. Eco’s statement for this issue:

We’ll be rewriting this before launch – we plan to move to a new vote tabulation algorithm.

[P3-M05] Failed vote ends with no error

Medium

In the computeVote function of the CurrencyGovernance contract, there are two cases when a failed vote ends with no error and instead emits a VoteResults event:

This is misleading, and it does not follow the principle of failing as early and loudly as possible. It also produces the same behavior as a successful vote that ends in a tie, which may lead to confusion.

Consider emitting a VoteFailed event on these cases and ensuring that computeVote cannot be called again.

Update: Not fixed. Eco’s statement for this issue:

In both of the cases covered the result of the vote is that 0 inflation is printed, 0 tokens are distributed to each prize winner, 0 tokens are accepted for deposit certificates, and 0 interest is paid on deposit certificates. We concluded that this is accurately represented by the VoteResult(0,0,0,0) event that the system emits, and the regular vote tally process already ensures that computeVote cannot be called a second time.

[P3-M06] Rejected votes can affect currency governance

Medium

The reveal function of the CurrencyGovernance contract ensures that the voter did not choose a non-zero value for both inflation and the number of certificates to issue.

However, there are other combinations of parameters that can affect the vote unexpectedly. In particular, it is possible to vote for inflation (or neither inflation nor deflation) and still choose a high interest. If the deflation vote succeeds, the interest chosen by the inflation voter is still used when calculating the median, provided it is higher than the lowest value chosen by a deflation voter. In this case, the deflation voter’s choice is discarded. Similarly, it is possible to vote for deflation (or neither) and still choose a high prize, which will be considered in the same way if the inflation vote succeeds.

It may seem counterproductive to vote in this way but there are potential game-theoretic reasons (e.g., a pre-commitment to an outrageous result on one side of the vote). Regardless, it is preferable to prevent undesirable results where possible rather than rely on assumptions about how users will behave.

The comment on the reveal function suggests that the function restricts inconsistent votes, but this is not enforced by the code.

Consider requiring all voters to choose either inflation or deflation and to prevent or disregard non-zero values for interest and prize when they are inconsistent with the vote.

Update: Fixed. The reveal function now calls the invalidVote function, which requires votes to be consistent.

[P3-M07] Ticket Registration emits the incorrect ticket number

Medium

In the registerFor function of the Inflation contract, the registrant is assigned a ticket immediately after the contract emits the corresponding event. However, the event uses 0-up indexing, whereas the holders mapping, which can be used to look up the ticket associated with an address, uses 1-up indexing.

This means the two mechanisms for determining the ticket associated with an address are inconsistent with each other. Consider using 1-up indexing in the TicketsRegistered event.

Update: Fixed.

[P3-M08] Duplicable votes

Medium

In the commit function of the PolicyVotes contract, a token holder can commit to a vote that supports a subset of the proposals on the ballot. The commitment is a keccak256 hash of the approved proposals with a random salt to provide entropy. Later, the token holder can reveal their vote and salt so it can be compared to the commitment and then processed if valid.

However, the commitment is not cryptographically tied to the token holder address. This means it is possible for a token holder to copy and submit another voter’s commitment without knowing the contents. When the original voter reveals their vote and salt, the copycat can reveal the same values.

Consider including the voter address within the hash commitment to prevent duplication.

Similarly, in the commit function of the CurrencyGovernance contract, a trusted node can commit to an encrypted vote and the VDF seed that was used to generate the encryption key. When the voter (or anyone else) reveals the VDF output, it can be used to decrypt and process the vote.

Once again, the encrypted vote is not cryptographically tied to the voter’s address, which means anyone can reuse the commitment and corresponding VDF seed without knowing the contents.

Consider including and verifying a hash of the voter address and their chosen parameters within the encrypted vote to prevent duplication. It is important to note that encrypting the voter address directly will not prevent vote duplication — it should be hashed, along with the vote parameters first.

Although simply encrypting the voter address will prevent direct duplication, it does not mitigate targeted modification of the ciphertext. When using a stream cipher for encryption (as the CurrencyGovernance contract does), a change in a particular location of the ciphertext will produce a corresponding change in the same location in the plaintext.

Note that we can segment the key stream created by keyExpand and the ciphertext using the corresponding plaintext section:

plaintext  = p_inflation || p_prize || p_certificates || p_interest
keystream  = k_inflation || k_prize || k_certificates || k_interest
ciphertext = c_inflation || c_prize || c_certificates || c_interest

Then,

ciphertext  =  plaintext  ^  keystream

becomes:

c_inflation  =  p_inflation  ^  k_inflation
c_prize  =  p_prize  ^  k_prize
c_certificates  =  p_certificates ^  k_certificates
c_interest  =  p_interest  ^  k_interest

Adding the voter address simply adds one more sub-encryption to the list:

c_voter  =  p_voter  ^  k_voter

There are two important observations:

  1. Flipping bits in c_voter will produce corresponding bit flips in the decrypted p_voter.
  2. This will not affect the decryption of any of the other parts of the ciphertext.

Notably, the copycat could construct a ciphertext that would replace the voter address in the corresponding plaintext with their own:

c'_voter  =  c_voter  ^  p_voter  ^  [copycat address]

This will now decrypt to the copycat address:

p'_voter  =  c'_voter  ^  k_voter
          =  c_voter  ^  p_voter  ^  [copycat address]  ^  k_voter
          =  p_voter  ^  ( c_voter ^ k_voter )  ^  [copycat address]
          =  p_voter  ^  p_voter  ^  [copycat address]
          =  0  ^  [copycat address]
          =  [copycat address]

Since the rest of the plaintext will be unchanged, this allows the copycat to use another vote as their own.

In fact, using this method, they could make targeted modifications to another vote provided the modifications can be described as a bitwise change. For example, they could toggle the high bit of the prize chosen by a target voter without knowing the original parameters.

This attack is possible whenever the copycat wants to change a predictable part of the underlying plaintext. Including and verifying a hash of all parameters and the voter address ensures that any modification will be detected.

Update: Not fixed. Eco’s statement for this issue:

We’ll be removing this obfuscation mechanism before launch.

[P3-M09] Confusing phase transitions

Medium

The inflation module of the Eco system is characterized by having clearly defined phases. For example, there is a commit phase, a reveal phase, a challenge phase, and a refund phase. Usually, at the end of the process, there is a destruct phase in which the contract is no longer useful. It is removed from the policy network and destructed.

These phases are critical for the success of the governance of the monetary processes and the policy network. However, the transitions between the phases are not so clear. Most of the functions will start with a set of require statements that ensure that they are executed only when the time-based and state-based constraints are satisfied. There are so many constraints of different sorts that it is hard to think about the possible phases, the things that trigger a transition, and which correct phase follows.

Consider modeling the system as a finite-state machine and refactoring the code to make this model clearly visible. The require statements could then be grouped into state-checking functions that return true if the system is in a specified state. Then, every action could be guarded by a single check to verify that the system is in the correct state and could end up updating the system to the next state.

The code would become more readable, it would be easier to analyze the system as a whole, and it would open the door to interesting new options like formally verifying all the state transitions.

Update: Partially fixed. The atStage modifier was added to make the transitions of the CurrencyGovernance contract clearer. The other contracts are still using the unclear stage transitions. Eco’s statement for this issue:

We agree that the code here is complicated and could be cleaner. We’re anticipating changes in this part of the system before we launch, and will take OpenZeppelin’s advice into consideration as we adapt the code to those changes.

[P3-M10] Contracts can be destructed

Medium

All the cloned contracts of the inflation module can be destructed. This happens when the contract has successfully finished all its responsibilities and is no longer needed.

The contracts are cloned just for a one-time usage, so there is no risk of other contracts internal to the Eco system that are depending on them. If they hold a policy role in the network, they remove themselves before calling selfdestruct; if they hold ether, it is transferred to the policy contract.

The selfdestruct happens in a very controlled way. However, it still is a very extreme action with no way to rollback. There could be a bug in the system that allows a call to selfdestruct before it is supposed to happen. This could leave a very important vote without the code that should execute it. And because the functions are not always verifying the sender, other kinds of bugs could let the wrong people destruct a contract. Not all of the contracts transfer the Eco tokens they might hold, so destructing them could lock the tokens transferred by mistake forever. Finally, even if the contracts are no longer useful for the Eco system, they could be useful for historical purposes or for other systems building on top of it.

Consider the more conservative approach of disabling the contracts instead of destructing them. Alternatively, consider allowing only trusted destroyers to call selfdestruct. Consider adding functions to recover tokens transferred by mistake.

Update: Not fixed.

[P3-M11] Missing incentives to complete the voting process

Medium

In the CurrencyGovernance contract, in order to complete the voting process, the trusted nodes have to commit votes, and then, somebody has to reveal them. Finally, somebody has to call the computeVote function. Similarly, in the PolicyVotes contract, the stakeholders have to commit votes and then reveal them, and finally somebody, has to call the execute function. These functions require work and money to pay for the gas.

There are no direct incentives for any of the prospective callers. There are going to be external incentives, the Eco team can take care of calling some of these functions, and the intrinsic incentive of everybody who is part of the system to make it work can be very powerful. However, a more powerful system would have embedded incentives that are transparently written into the blockchain. As it is, the system depends on a traditionally centralized entity to put the incentives in place and to constantly care for them.

Consider adding incentives to the voting protocol. An idea could be to give priority to the voters when disbursing the inflation prize or to purchase deposit certificates. Another could be to set up a gas station network that will be used to pay for the functions that finalize the voting, and that could be financed through the same minting process that ends a vote. At the very least, the external incentives should be described in the contracts, so voters know that they can trust the system to continue and not worry about their money being poorly managed due to neglect.

Update: Not fixed. Eco’s statement for this issue:

In the launch version of the system, trustees will be compensated. Compensation will be conditional on revealing a valid vote.

[P3-M12] Events not emitted for important state changes

Medium

In Solidity, events are used to log important state changes on the contracts. Users of the contracts can subscribe and be notified when these events happen. They are also useful to analyze the historic transactions and to find issues or potential problems.

Some of the important state changes of the Eco contracts do not emit events.

Consider emitting events at the end of the following functions:

Update: Fixed. The events were added and are now emitted by the corresponding functions: ProposalSupported, ProposalRefunded, PolicyVoteRevealed, PolicyVoteCommitmentRecorded, PolicyVoteChallenged, VoteCompleted, TrustedNodeAdded, and TrustedNodeRemoved.

[P3-M13] Unbounded loops

Medium

Multiple for loops are bounded by a variable that does not have a maximum value:

  • In CurrencyGovernance, the loops in L266 and L313 are bounded by the number of trusted nodes.
  • In Inflation, the loop in L111 is bounded by the number of winners resulting from a vote.
  • In PolicyVotes, the loops in L125, L138, L160, L210, and L277 are bounded by the number of candidate proposals.

These variables are supposed to be small. For example, according to the Eco team, the initial number of trusted nodes is going to be around 20. In order to add more trusted nodes, a proposal needs to be voted on. The number of winners is selected after a vote in which only trusted nodes can participate. Because they are trusted, this is likely to be a reasonable number that does not break the system. The maximum number of proposals that go into PolicyVote is set to 3 by the PolicyProposals contract.

However, there is nothing in the contracts of those loops that enforces a maximum value. Actors and proposals can be malicious or make mistakes, and the loops could get too big. Therefore, the system is susceptible to hit the maximum gas limit, which would prevent critical functions to execute.

Consider defining and documenting a safe maximum value for the upper bound on every loop, to guarantee the correct functionality of the contracts.

Update: Partially fixed. One of the loops in the CurrencyGovernance contract and all of the loops in the PolicyVotes contract have been removed. Comments about the bounds were added to all the other loops. However, note that the bounds are still not enforced on-chain.

[P4-M14] Contracts not using safe math

Medium

The contracts CurrencyGovernance and Inflation do not use SafeMath to prevent overflows and underflows in arithmetic operations. They have a comment at the top that says, “Humongous Safety Warning: This does not check for math overflow anywhere.” This comment is more alarmist than informative.

The contract DepositCertificates uses SafeMath intermittently.

The contracts PolicyProposals, TrustedNodes, and PolicyVotes neither use SafeMath nor have safety warning comments. PolicyProposals contains a decrement that may underflow in some scenarios.

The only valid reason for not using SafeMath is that the design of the system makes it impossible for overflows or underflows to occur. But even in that case, the only way to prove it is with extensive formal verifications, and a mistake in any place of the system could be catastrophic.

Consider being extra safe by adding SafeMath operations to all the arithmetic operations in all the contracts.

If that becomes significantly more expensive, then consider adding a comment to every statement with an arithmetic operation explaining why it is safe. Ideally, these claims would be accompanied by a formal verification.

Update: Fixed. All the contracts are now using SafeMath for all their arithmetic operations that can overflow or underflow.

Low Severity

[P3-L01] Top proposals are recalculated every time one is supported

Low

In the PolicyProposals contract, the best array stores the top 3 most supported proposals. Every time somebody supports a proposal, the top 3 are recalculated. This increases the gas costs of supporting a proposal, and in many cases, it could be wasted work.

Consider moving the calculation of the top 3 proposals after the staking phase ends, doing it only once in the compute function.

Note: The Eco team is planning to select only one proposal out of this voting phase. In that case, there is no need to sort the proposals every time support is called. The most staked proposal can be kept in a simple variable updated in the support function, or it can be found at the end with a simple loop in the compute function.

Update: Fixed. The best variable is now a single address. It is kept up-to-date by the support function.

[P3-L02] Confusing operation to update the no-confidence stake

Low

In the PolicyVotes contract, it is possible to challenge all the proposals. When this happens, the token balance of the challenger set at a specific historical time when the contract was configured is added to the noConfidenceStake.

This function is confusing, because it subtracts the amount previously staked by the sender and adds the new amount. Also, it checks that the new stake is higher than the previous value. However, the amount is always taken from the same historic balance, so the sender can only go from 0 stake to everything staked.

Consider making this function clearer by requiring that the sender has not challenged the proposals yet and that it held tokens at the configured time. In that case, the balance can just be added to the noConfidenceStake without the comparison and the subtraction.

Update: Fixed. The challenge function now has the suggested checks and is simpler and clearer.

[P3-L03] Missing time requirement to challenge

Low

In the PolicyVotes contract, there are state variables that define the time intervals for the different phases of the policy decision process. Those variables are holdEnds, voteEnds, revealEnds, and challengeEnds.

The comment of the challengeEnds variable says that it is used to define when the veto period ends, but it is never used in the challenge function. Furthermore, this function does not have any type of time requirement. Based on how the other functions work, it should be possible to challenge proposals only during the CHALLENGE_TIME.

Consider adding a time requirement in the challenge function that allows challenging proposals before the challengeEnds timestamp. It could make sense to also require that the holdEnds or the revealEnds timestamps have passed.

Update: Fixed. The challenge function now requires that the revealEnds timestamp has passed. However, note that the state transitions in this contract are still confusing and prone to error, as explained in [M3-09] Confusing phase transitions”.

[P3-L04] Confusing reorder function

Low

Once a vote in the PolicyVotes contract has finished and has been executed, the proposals with enough staked tokens are enacted. In this contract, there is also a reorder function that can alter the order in which the proposals are enacted.

However, it is not clear why a new order is needed, when the proposals should be reordered, or how the sender decides the new order.

Consider adding comments to explain the purpose of this function in further detail.

Note: The Eco team is planning to stake on only one proposal at a time and to remove the reorder function.

Update: Fixed. Now only one proposal at a time is staked, and the reorder function was removed.

[P3-L05] No easy way to get the number of committed or discarded votes

Low

In the CurrencyGovernance contract, when a new vote is committed, the number of totalVoters is increased by 1. Then, during the reveal phase, when an invalid vote is discovered, this same totalVoters variable is decreased by 1.

Reusing this variable makes it harder after the reveal phase to get the number of committed and discarded votes. These values can be calculated by getting the event logs or by looking at the state of the contract in the past, but this is not straightforward. Getting these values quickly could be important for checking the health and security of the system or for other contracts building on top of it.

Consider using separate public variables for the number of committed votes and the number of discarded votes.

Update: Not fixed. Eco’s statement for this issue:

We will likely be replacing this entire mechanism before launch. Subsequent feedback on the currency governance system has led us to refine certain processes which may represent larger changes, so we want to hold off on the smaller fixes for the time being.

[P3-L06] SafeMath used for uint128 variables

Low

The SafeMath contract of OpenZeppelin protects against overflows and underflows but only for operations on uint256 variables.

In line 28 of the DepositCertificates contract, it is declared that SafeMath will be used for uint128 operations, which would be problematic. However, in this contract, no SafeMath operations on uint128 are executed.

Consider removing the statement that declares the use of SafeMath for uint128 variables.

Update: Fixed. Now SafeMath is used for uint256 variables.

[P3-L07] Wrong variable type in an event

Low

The Sale event of the DepositCertificates contract is declared with a uint256 as the second parameter.

This event is only used in the deposit function, which passes a uint128 variable as the second argument.

Consider changing the parameter of the event to be uint128.

Update: Fixed.

[P3-L08] Unnecessary require statement

Low

In the withdrawFor function of the DepositCertificates contract, there are four require statements that check if a withdraw can be executed.

The second require statement checks if the current time is greater than or equal to the end of the sale. The fourth require statement checks if the current time is greater than or equal to the end of the sale plus one interest period. Therefore, the second require statement is unnecessary.

Consider deleting the unnecessary require statement.

Update: Fixed.

[P3-L09] Slightly biased inflation lottery

Low

The Inflation contract achieves inflation by pseudo-randomly distributing the funds among token holders in proportion to their holdings (at the previous generation in the balance store).

To achieve this, it first allows anyone to register a lottery ticket on behalf of any token holder. Each ticket is assigned a range of unique winning numbers, where the size of the range is equal to the number of tokens held. Subsequently, it divides the inflation funds evenly among a series of lotteries and allocates each jackpot to the holder of the ticket containing the pseudo-randomly chosen winning number.

However, the mapping from pseudo-random number to lottery ticket is slightly biased towards lower winning numbers, corresponding to a slight bias in favor of early registrants. Specifically, if we define the total number of winning numbers as N, the lottery chooses a uniformly distributed 256-bit pseudo-random number R and reduces it modulo N. Whenever N does not evenly divide 2**256, the largest possible 256-bit number will map to some value between 0 and N. Numbers less than this value can be reached from one more possible R than numbers above this value.

This effect is very small for large values of 2**256 / N and is unlikely to be important in practice. Nevertheless, it is a provable bias in the lottery. Consider discarding the range of R values that do not map evenly to numbers between 0 and N and choosing another pseudo-random number.

Update: Not fixed. Eco’s statement for this issue:

We agree that this is a problem. Since we know that the inflation lottery is going to change to reflect new thinking on economic governance, we’re deferring fixing this until our second audit.

[P3-L10] Important state variables are not public

Low

In the Inflation contract, the generation state variable is used to get a historical token balance from the address registering for inflation payouts. Similarly, the generation state variable in the PolicyProposals contract and the analogous one in the PolicyVotes contract are used to get a historical token balance from the address supporting a proposal.

These variables are not public, which makes them hard to read for users and contracts building on top of them. They are important to understand the state of the contracts and for the stakeholders to make informed decisions before making their transactions.

Consider giving easier access to the generation variables by making them public.

Update: The generation state variables are now public in the Inflation, PolicyProposals, and PolicyVotes contracts.

[P3-L11] Redundant addresses in structs

Low

In the PolicyVotes contract, there is a Prop struct and a proposals mapping. The key of the mapping is the address of a proposal, and the value of the mapping is the Prop struct which stores the same address and the amount staked. Something similar happens in the PolicyProposals contract where its own Props struct and proposals mapping duplicate and store the same address.

This redundancy is needed because mappings “are virtually initialised such that every possible key exists and is mapped to a value whose byte-representation is all zeros”. Therefore, it is necessary to store a value on the struct that will indicate if the proposal is in the mapping or not.

However, using the address for this makes the code a little more complicated. Consider using a boolean named exists in the struct instead of the address. This will make the pattern clearer and more readable, while avoiding duplicating the address.

Update: Partially fixed. The proposals mapping was removed from the PolicyVotes contract. The PolicyProposals contract still has the proposals mapping duplicating the address.

[P3-L12] Units of variables are not clear

Low

When writing code for Ethereum, there are usually at least two units at play: wei and the basic unit of a token specific to the system. Often, percentages and the count of other items are also used.

In many places of the Eco system it is not clear what the units of the variables and parameters are, such as in inflation, prize, certificatesTotal, and interest.

Consider clarifying which unit they are using in the comments of the variables and parameters of the system .

Update: Fixed. The variables now have comments indicating their units.

[P3-L13] Inconsistent use of the onlyClone modifier

Low

In the Eco system, most of the contracts that are executed are clones, instantiated for a one-time use only and then destructed. There is an onlyClone modifier that prevents a function from being executed on the original contract. This modifier is correctly used on the cloned contracts to prevent the original from self-destructing. However, it is also used on a couple of other functions that will not destruct the original, like configure.

This inconsistent use is confusing. It makes no sense to execute most of the functions on the original contracts, so consider adding the onlyClone modifier to all the functions that are intended for clones only.

Update: Not Fixed. Eco’s statement for this issue:

It definitely doesn’t make sense to call these functions on the original contracts, but checking at every call would increase the gas cost for those calls. Since there’s no negative impact on the system resulting from functions being called on original contracts, we prefer to save the gas on clone calls at the expense of not reverting for invalid ones to the original contracts.

[P3-L14] Duplicated statements

Low

In the withdrawalAvailableFor function of the DepositCertificates contract, there are two different if statements that check the same condition — whether or not the certificate term has expired. If so, _availableBalance is set to the total interest earned and then later, incremented by the principal, indicating that the user can withdraw all locked funds.

Consider merging the two operations into a single code block under one conditional.

In the reveal function of the PolicyVotes contract, there is a duplicated loop — first in L125 and then in L138. This wastes gas and makes the code harder to understand.

Consider removing the second loop by moving the statement in L139 to the end of the first loop.

In the computeVote function of the CurrencyGovernance contract, there are duplicated calculations:

  • The number of non-zero inflation votes is independently calculated in L357 and L359.
  • The number of non-zero certificate votes is independently calculated in L386 and L388.
  • The shift of the mid variable to the relevant section of the _certificatesTotalOrder array is independently calculated in L389 and L393.

Consider assigning the calculations to a variable in a common code block instead of duplicating the code.

Update: Partially fixed. The loops were removed from the reveal function of the PolicyVotes contract. The other duplicated statements are still present. Eco’s statement for this issue:

The Solidity optimizer isn’t great, and function dispatch can be inefficient. In a few places we duplicate code instead of abstracting it into a function to save on gas costs.

[P3-L15] Unused variables

Low

In the CurrencyGovernance contract, there are two unused variables. Firstly, the REVEAL_TIME constant is declared but never used. Secondly, the state variable randomVDFDifficulty is instantiated in L435, but other than that, it is never used.

Similarly, in the PolicyVotes contract, the LOCKUP_TIME constant is declared but never used.

Consider removing all the unused code to reduce the size of the contracts and to make them clearer.

The winners variable of the CurrencyGovernance contract is a slightly different situation. It is declared as an internal state variable, but it is only used inside the computeVote function.

Consider declaring the winners variable inside the computeVote function.

Update: Fixed. The REVEAL_TIME constant and the randomVDFDifficulty state variable were removed from the CurrencyGovernance contract. The LOCKUP_TIME constant was removed from the PolicyVotes contract. The winners variable is now declared in the initiateInflationCycle function.

[P3-L16] Multiple wrong comments

Low

In the computeVote function of the CurrencyGovernance contract, when the number of revealed valid votes is 0, the comment says, “[…] some votes could not be revealed […].” A more accurate comment would be, “All the committed votes were invalid.” It also says, “Alternately, the next inflation cycle has started, and this contract is invalid,” but that check happens in a higher block in L232.

The TrustedNodes contract maintains an array with the addresses of the trusted nodes. When an address that is not at the end of the array is distrusted, it is overwritten by the last address, which is then removed from the end of the array.

The comments in the functions trust, distrust, and trustedNodesLength are wrong, suggesting that the size of the array is never decreased and that new trusted nodes are inserted into empty slots.

In the comment of the support function of the PolicyProposals contract, it says that if the stake cannot be increased, the function will do nothing. However, the actual behavior is to revert when the call fails to increase the stake.

The comment from the DepositCertificates contract states that the contract instance is cloned by the Inflation contract when a deflationary action is the winner. However, the CurrencyGovernance contract is the one that does that during the computeVote function.

The certificatesTotal variable in the DepositCertificates contract is the maximum deposit amount the contract will accept, whereas the totalDeposit variable is the amount currently deposited. The variable comments indicate the opposite.

Consider updating the comments to describe the actual behavior.

Update: All the comments mentioned above were fixed.

[P3-L17] Wrong error messages in require statements

Low

In the computeVote function of the CurrencyGovernance contract, there are multiple require statements in L269, L275, L281, and L287 that state ‘... but one is not‘, when actually, it should say ‘... but at least one is not‘.

Consider changing the messages to describe the actual behavior.

Update: Fixed. Error messages have been modified following our suggestion.

[P3-L18] Use of magic constants

Low

There are three locations where the policy is updated using a SimplePolicySetter clone initialized with magic string constants "CurrencyGovernance", "PolicyProposals", and "PolicyVotes".

This makes the code harder to understand and maintain.

Consider defining constant variables with inline comments explaining the relationship between the magic strings and the corresponding constants in the PolicedUtils contract.

Update: Fixed. The string constants were replaced with named constants from the PolicedUtils contract.

Notes

  • The configure function in PolicyVotes initializes the contract variables. It is called immediately after being cloned in PolicyProposals, as it is supposed to be. However, this is not enforced by the PolicyVotes contract and could lead to vulnerabilities if it is not called immediately. For example, if the execute function is called before challengeEnds and proposalOrder are initialized, the contract will self-destruct without performing the vote or executing proposals.
    Consider initializing holdEnds, voteEnds, revealEnds, challengeEnds, and generation in the initialize function. This is possible since they do not depend on the argument to configure. For the other variables (proposalOrder and proposals), consider adding a guard condition to all functions that use them to ensure they were initialized.
    Update: Not fixed.
  • In the PolicyVotes contract, the synonyms veto, challenge, and noConfidence are used interchangeably to refer to the same concept. This makes the readers of the code wonder if the three words are actually synonyms in the contract. Consider choosing only one of them and using it in all comments, variables, and functions.
    Update: Fixed. The PolicyVotes contract now uses veto only, never challenge nor noConfidence
  • The cast to address in L205 of the PolicyProposals contract is unnecessary because the variable is already an address. Consider removing it.
    Update: Not fixed.
  • In the support function of the PolicyProposals contract, the array of best proposals is sorted by stake. When there are multiple proposals with the same amount of stake, this function prefers the ones that got their stake first. Consider adding a comment to make it clear that some proposals with the same amount of stake as the selected ones can be left out of the ballot.
    Update: Fixed. The best variable now holds only one address.
  • In the PolicyProposals contract, when a proposal is registered, a ProposalAdded event is emitted. This event only logs the address of the proposal. Consider also logging the address of the proposer.
    Update: Not fixed.
  • In the computeVote function of the CurrencyGovernance contract, when the result of the vote is in favor of inflation, an InflationStarted event is emitted. When the result is in favor of deposit certificates, a DepositCertificatesOffered event is emitted. These events only log the address of the contract that will handle the inflation or the deposit certificates. Consider adding the resulting values of the vote as parameters to the events:
    • InflationStarted log winners and prize
    • DepositCertificatesOffered log certificatesTotal and interest

    Update: Not fixed. Eco’s statement for this note: “The InflationStarted and DepositCertificatesOffered events don’t contain the values of the votes as those values are already available through the VoteResults event.”

  • The CurrencyGovernance contract contains a configurable votingVDFDifficulty parameter that enforces a computational delay between when a vote is committed and when it can be unilaterally revealed by a third party.
    To ensure votes remain secret during the voting phase, the difficulty should be chosen so that optimized hardware requires longer than the VOTING_TIME parameter to compute the VDF result.
    This implies voters will need to pre-compute their own VDF result in preparation for the vote. The Eco team have indicated that voters will be aware of this requirement and will likely prepare the VDF result well in advance. Consider documenting this requirement, along with the rationale in the contract’s comments.
    Update: Not fixed. Eco’s statement for this note: “VDFs will no longer be used in our currency governance process once it has been updated based on economic model feedback from our advisors.”.
  • In the reveal function of the CurrencyGovernance contract, there is a conditional statement that evaluates if a vote is invalid, and if so, it is discarded. The if block ends with a return statement, but the else block does not. Because there are no more lines of code after the else block, the return statement is not necessary. Consider removing the return statement.
    Update: Not fixed.
  • The docstrings of the contracts and functions are partially following the Ethereum Natural Specification Format (NatSpec). They use the @title and @param tags, but they do not use @return, @notice, or @dev. Consider adding the missing tags.
  • The following state variables are using the default visibility:
  • Variables are declared as uint in TrustedNodes.sol: L27, L64, and L65. To favor explicitness, consider changing all instances of uint to uint256.
    Update: Fixed.
  • The uint128 type is used in the DepositCertificates contract for the _amount and _interest variables. The reason for not using the more common uint256 type is not clear, and this is not explained in the comments of the functions. Consider documenting the reason for using uint128 or updating all variables to be uint256.
    Update: Not fixed.
  • To favor explicitness and readability, several parts of the contracts may benefit from better naming. Our suggestions are:

JTNDZGl2JTIwY2xhc3MlM0QlMjJidG4tY29udGFpbmVyJTIyJTNFJTBBJTBBJTNDYnV0dG9uJTIwb25jbGljayUzRCUyMmN1c3RvbXNjcm9sbCUyOCUyOSUyMiUzRSUzQ2ElMjBocmVmJTNEJTIyJTIzcGhhc2UtMiUyMiUyMGNsYXNzJTNEJTIyY3VzdG9tLWxpbmslMjIlM0UlM0MlMjBQcmV2aW91cyUzQyUyRmElM0UlM0MlMkZidXR0b24lM0UlMEElMEElM0NidXR0b24lMjBvbmNsaWNrJTNEJTIyY3VzdG9tc2Nyb2xsJTI4JTI5JTIyJTNFJTNDYSUyMGhyZWYlM0QlMjIlMjNwaGFzZS00JTIyJTIwY2xhc3MlM0QlMjJjdXN0b20tbGluayUyMiUzRW5leHQlMjAlM0UlM0MlMkZhJTNFJTNDJTJGYnV0dG9uJTNFJTBBJTBBJTNDJTJGZGl2JTNF

Phase 4: Verifiable Delay Function

The phase 4 audit was delivered to the Eco team on July 17th, 2019.

The audited commit is de81d9bad4195e03f07aedd2a6817f0cb04a8c8d, and the files included in the scope were VDFVerifier.sol and BigNumber.sol.

Note that the audit was to verify the correct functioning of the contracts with respect to their intended behavior and specification. The cryptographic strength of the design was not explored and should be verified by cryptographic experts.

Here are our audit assessment and recommendations, in order of importance.

Update: The Eco team applied a number of fixes based on our recommendations. We address below the fixes introduced up to commit af3428020545e3f3ae2f3567b94e1fbc5e5bdb4c of the currency repository.

Contract Summary

VDFVerifier.sol

A Verifiable Delay Function (VDF) is a mathematical technique to produce a provably unbiased random number. This is achieved by constructing a function that requires a known minimum time to compute, even with parallel hardware, but can be verified quickly.

The Eco design uses a VDF to randomly distribute funds in the Inflation contract and to encrypt the votes of trusted governance nodes in a way that can be eventually revealed, even without the cooperation of the original voter.

The VDFVerifier contract verifies claimed solutions to VDF inputs based on the Pietrzak specification.

BigNumber.sol

The BigNumber library provides a mechanism to perform mathematical operations on unsigned integers that are larger than uint256. It achieves this by storing the numbers as bytes arrays, operating on one 256-bit word at a time and then combining the results back into the bytes arrays.

It is used in the VDFVerifier contract as part of the verification procedure but it is also designed to perform generic mathematical operations.

Ongoing Research

The number of sequential operations in the VDF is a configurable parameter. It must be large enough that no plausible attacker can compute the VDF solution faster than the minimum time bound. However, it must also be small enough for legitimate users to compute VDF solutions within reasonable times.

This is a balancing act, and the ideal range of values is still an area of ongoing research, which includes estimating the effectiveness of the best designs executed in any plausible hardware, as well as attempting to reduce a well-resourced attacker’s advantage over consumer grade hardware.

The Eco team intends to track this research and configure the VDF difficulty parameter accordingly.

Open Questions

Two of the questions that were raised during the audit have been taken under consideration by the Eco team to confirm with their cryptographic experts.

Firstly, a direct reading of the VDF specification suggests that all values should be in the positive signed quadratic residue group with modulus N. This means they should be squares (mod N), and the canonical representation is the absolute value when represented as elements between -N/2 and N/2. The VDFVerifier contract ensures the values are squares but does not perform further bounds checking or transformations into values less than N/2. The purpose of using the signed quadratic residue group is that membership in it can be efficiently tested. Eco has sidestepped this issue by explicitly squaring all values before they are used in calculations. This makes it plausible that the additional mapping is unnecessary. Nevertheless, this should be confirmed with a cryptographer. The Eco team have indicated that the algorithm was originally designed with a cryptographer and they are in the process of double-checking its validity.

Secondly, in one use case, the Eco contracts use an Ethereum block hash, which is a 256-bit pseudo-random value, such as a VDF input. However, if an adversary precomputes the VDF solution for a large number of prime values and the block hash happens to have factors exclusively drawn from that list, the adversary will be able to use their precomputed solutions to immediately calculate the required solution. This raises a question: What is the required security strength S, and what is the chance that a uniformly random 256-bit value would be S-smooth? The Eco team have indicated that they are in the process of resolving that question.

 

Critical Severity

[P4-C01] Unknown attacker advantage

Critical

The VDF difficulty parameter must be chosen to ensure any plausible attacker cannot compute the VDF solution within the minimum time bound. Correctly setting this value requires estimating the capability of the attacker’s hardware. Unfortunately, this is an area of active research and therefore is currently unknown. It is worth noting that the Ethereum Foundation, Protocol Labs, and other contributors are actively involved in this research and intend to significantly raise the standard of widely available hardware in order to minimize the plausible attacker advantage.

The Eco security documentation provides time estimates for consumer hardware, but it does not contrast this with the advantage an attacker may have from using an optimized ASIC.

Consider documenting the maximum attacker advantage implied by the choice of time windows and difficulty functions for all use cases. However, it is our understanding that the field is not mature enough to confidently estimate the true upper bound, and the procedure will remain vulnerable to potential attackers with a greater advantage than the selected one.

Update: Not fixed. Eco’s statement for this issue:

The advantage an attacker can achieve using custom hardware is definitely a concern here. We’ve done internal research on high end consumer hardware and extrapolated beyond that to attempt to account for custom hardware. However, we anticipate more information about the power of custom hardware before we launch. We’ll need to review the Ethereum Foundation’s work on hardware VDF implementations and factor those gains in to the security parameters we use in our VDFs at launch.

[P4-C02] Calculation error in the BigNumber addition

Critical

The BigNumber library has an innerAdd function that adds two numbers, starting from their least significant 256-bit words.

This function needs to take the carry into account, when the addition of two words overflows. To do this, in L283, it checks if the word of the first number exceeds the minimum size that can be added without overflow. This value should be calculated as follows:

word1 + word2 + carry > MAX_256_BIT_INTEGER [ overflow condition ]
=>   word1 > MAX_256_BIT_INTEGER - word2 - carry
=>   word1 > MAX_256_BIT_INTEGER - ( word2 + carry )

However, it is calculated as:

word1 > MAX_256_BIT_INTEGER - ( word2 - carry )

In addition to this incorrect calculation, the last term underflows when word2 is 0 and carry is 1.

Consider fixing the carry calculation. Note that the correct calculation obsoletes the switch statement in L288, which should handle the case where word2 + carry overflows instead.

Update: Fixed. First, the conditional was updated to the suggested calculation. And afterwards, the switch statement was updated to handle the case where word2 + carry overflows. However, note that there are still no specific tests to cover all possible code paths of the BigNumber operations – as reported in [P4-H03] Missing unit tests

High Severity

[P4-H01] Undocumented cryptographic algorithm changes

High

The verification procedure in the VDFVerifier contract is based on the The Simple Verifiable Delay Functions specification. However, the implementation has some differences with the specification:

  • The implementation uses the Fiat-Shamir heuristic to make the verification non-interactive. This needs to be done very carefully to ensure the prover, who now has some control over the random number, cannot leverage their additional power to generate a false proof.
  • The specification requires that all input variables are tested to ensure they are in the Positive Signed Quadratic Residue group mod N. Instead, the input values are squared to produce a corresponding value in that group.
  • The commitment is for the input x value before it is squared, which is a value that has no analogue in the specification.
  • In the specification, the difficulty of computing the VDF is parameterized by the number of squaring operations, which can be any positive integer. In the implementation, it is parameterized by the number of steps in the proof, thereby implicitly fixing the number of squaring operations to be a power of 2.
  • The last step in the specification occurs when the function has been reduced to y = x^2. The implementation stops at the previous step when y = x^4.

There are practical reasons for these deviations, and they mostly restrict and simplify the procedure, but as a general principle, modifications to cryptographic algorithms have a high probability of introducing vulnerabilities. They may also mislead users who are unaware of the changes to misuse the algorithm.

Consider documenting any discrepancies between the specification and the implementation, along with an explanation for the change and a security justification.

Update: Not fixed. Eco’s statement for this issue:

When applying the Fiat-Shamir heuristic we create a situation where a user who can control the input value of the VDF has influence over the steps that are used to prove the correctness of the VDF computation. We’re confident in the application of the Fiat-Shamir heuristic here specifically because it’s applied as described in the source paper “Simple Verifiable Delay Functions” (Pietrzak) and in the similar paper “Efficient verifiable delay functions” (Wesolowski).

Ben Fisch, one of our early team members and cryptographic advisors, drafted the following responses to the points raised:

  • Our implementation follows the protocol for the original version of Simple Verifiable Delay Functions, which can be retrieved from ePrint. Our implementation squares the input x to produce z = x^2, and then runs the VDF on z as an input. This guarantees that z is in the Quadratic Residue subgroup mod N. The VDF verifier program receives x, which enables it to verify that z is in the Quadratic Residue subgroup. Thus, the VDF protocol we implemented, which proves that y is the result of the repeated squaring of z a specified number of times, has been proven secure in both the original version of the paper, as well as in the survey article https://crypto.stanford.edu/~dabo/pubs/papers/VDFsurvey.pdf. It is statistically secure as long as the input z lies in a group with no low order elements, which is indeed true of the Quadratic Residue subgroup mod N, where N is the product of strong primes.
  • On page 6 of the latest version of “Simple Verifiable Delay Functions”, referenced here as the “specification”, it is explained that the original version of the paper used the subgroup of Quadratic Residues, while the newer version uses the Positive Signed Quadratic Residues. The motivation for this change is irrelevant to our setting, where it is completely fine to fix the VDF input challenge to be x^2. In fact, the same technique is also used in the recent paper Continuous Verifiable Delay Functions. https://eprint.iacr.org/2019/619.pdf.
  • A restriction on the number of squaring operations does not affect security, and is good enough for our application.
  • Stopping at y = x^2 does not affect the security of the protocol.

[P4-H02] Excessive use of assembly

High

The BigNumber library uses inline assembly to manage buffers and manipulate individual words in memory. However, in many functions, it also uses assembly to perform the calculations and control flow. These could be written in Solidity, which would be clearer, less error-prone, and more conducive to code reuse.

Consider extracting low-level memory management operations (like storing a word at a particular location or clearing the zero words from the start of a buffer) into separate functions that use inline assembly and using Solidity for all other logic and processing.

Update: Not fixed. Eco’s statement for this issue:

The BigNumber library is external code that we’ve imported so we could modify it. We’d prefer to participate in a rewrite in collaboration with someone who could be a permanent owner for the library.

[P4-H03] Missing unit tests

High

Tests are the best way to specify the expected behavior of a system. When the code is written test-driven, the test coverage is automatically 100%, many issues are prevented, and the design of the code can be improved. Additionally, when bugs are found, it is easier to fix them without introducing regression errors.

There are no unit tests for the functions of the BigNumber library. Instead, they are tested through the unit tests of the VDFVerifier contract. The correct functionality of this library is critical for the success of the system. Even if all the features of BigNumber used by the VDFVerifier are currently correct, it is possible that, in the future, a change in the verifier assumes that an untested BigNumber code path is correct and starts breaking in surprising ways.

In this case, it is particularly important because a large fraction of the contract is written in assembly, which is harder to parse and reason for. Note that the use of assembly discards several important safety features of Solidity, which may render the code less safe and more error-prone.

Consider test-driving a rewrite of the BigNumber library.

Update: Not fixed. See Eco’s statement for this issue in [P4-H02] Excessive use of assembly.

[P4-H04] BigNumber internal values can be manipulated

High

The BigNumber library internally stores its value in a bytes buffer. When it is initialized with a uint256 or a bytes buffer with a length not divisible by 32, a new bytes buffer is allocated for the BigNumber object.

However, when it is initialized with a bytes buffer with a length divisible by 32, it uses that buffer directly in its internal representation. This means that if the caller subsequently clears or modifies the input buffer, it will corrupt the BigNumber value.

Similarly, the asBytes functions return a new buffer when no output size is specified or the output needs to be padded However, they return a reference to the internal bytes buffer when the requested size matches the BigNumber size. Once again, if the caller modifies the returned buffer, it will corrupt the BigNumber value.

Consider creating a new buffer for every BigNumber instance and returning a new buffer whenever asBytes is called.

Update: Not fixed. Eco’s statement for this issue:

A user of the library could definitely modify the buffer as described, but our system uses the library internally only so there’s no opportunity to use this maliciously. The problem should be fixed before this BigNumber code is released as a library, but it doesn’t represent an attack against our system.

Medium Severity

[P4-M01] Undocumented security assumptions

Medium

The VDFVerifier contract uses a constant modulus N. This is the 2048-bit number from the (elapsed) RSA challenge. The security of the VDF depends on various assumptions about that value:

  • It is the product of two primes.
  • The factors are safe primes.
  • No attacker knows or can obtain the factorization.

Naturally, the Eco team is unable to verify these claims. In such cases, it is good practice to clearly explain the assumptions and their security implications.

Consider adding the reason for the choice of N as well as the security assumptions and implications to the documentation.

Update: Fixed. A comment has been added to explain the security assumptions of the chosen N.

[P4-M02] VDF inputs may be precomputable

Medium

The security of the VDF relies on potential attackers having a known maximum time window to complete the attack. This assumption can be undermined if:

  • The attacker has precomputed the VDF solution for the input x.
  • The attacker has precomputed the VDF solution for the factors of x.

In the current design:

  • The Inflation contract uses a recent Ethereum block hash as input to the VDF. This is believed to be probabilistically immune to precomputation (see the Open Questions section).
  • The individual trusted nodes use a VDF to mask their votes during currency governance. The VDF inputs will be chosen by the Eco-provided software to be immune to precomputation.

However, the VDFVerifier contract is designed to be usable in other scenarios and should enforce secure inputs wherever possible. Potential modifications:

  • Enforce a minimum x value outside the range of plausibly precomputed values. It is worth noting that the Eco VDF documentation states that x should be at least 256 bits, but this is not enforced by the contract.
  • Hash the input x value to probabilistically ensure a large factor.
  • Use the Miller-Rabin primality test to ensure x is probably prime and is therefore immune to having the VDF solution of its factors precomputed. This idea was suggested by the Eco team.

Consider restricting or modifying the input x to mitigate against precomputation and documenting the method chosen, along with its security assumptions.

Update: Partially fixed. The start function now checks if x is a probable prime with 10 iterations. Eco’s statement for this issue:

The next iteration on our code will reduce the use of VDFs to just a few cases, where the input will always be a block hash. We believe that this, combined with the Miller-Rabin primality testing, will be sufficient to ensure the security of the processes it will be used in.

[P4-M03] Returning the incorrect buffer

Medium

The innerModExp function in the BigNumber contract has an assembly loop that removes leading zero words in the result and decrements the buffer length accordingly. However, if the base value is zero, the result will be zero. This will cause the loop to continue past the end of the result buffer until it reaches the first non-zero word. Then the length field will underflow and become huge, causing the function to return an arbitrary junk value. Alternatively, if there are no non-zero bytes after the return buffer, the loop will never terminate and exhaust all the gas.

Similarly, the privateRightShift also has an equivalent loop. If the right shift causes the result to be zero, it will also either return an arbitrary junk value or enter an infinite loop.

Consider adding bounds checking to ensure the loop does not pass the length of the result buffer.

Update: Fixed. Now both privateRightShift and innerModExp implement bound checks.

[P4-M04] The identity precompile return value is ignored

Medium

In the innerModExp function of the BigNumber library, the identity precompiled contract stored at address 0x4 is called in L543, L554, and L565 to copy the arguments to memory. Only the last call checks the return value for errors during the call.

Consider adding checks to all the calls to the identity precompiled contract.

Update: Fixed. Now, the results of all the calls to the identity precompiled contract are combined with an and operation, and afterwards, they are checked that none of the calls failed.

[P4-M05] Cannot verify short proofs

Medium

When starting a proof in the VDFVerifier contract, the minimum t value is 1. However, the update function that is used to complete the proof has a minimum _nextProgress value of 1, which is assumed to be less than t (and t - 1 in the last step of the proof).

The contract should be able to directly verify the relationship, but it requires the prover to provide the intermediate u value, which does not exist. Consequently, the prover cannot complete the proof.

Consider requiring t to exceed 1, or provide a mechanism for the contract to verify the function when t is 1.

Update: Fixed. Now t must be at least 2.

Low Severity

[P4-L01] Inconsistent representations of zero

Low

The BigNumber library makes a new instance by either passing a dynamically-sized bytes array or a uint256 value.

When the empty bytes array is used to make a new instance, it is internally represented as an array of length 0. This is consistent with the manually-constructed values produced by other functions. However, when the 0 uint256 is used to make a new instance, it is internally represented as an array of 32 zero bytes. This inconsistency makes the cmp function fail when the two different representations are compared. Consequently, the functions that use cmp (like privateDiff) will behave in unexpected ways when operating on the two different representations of 0.

Consider using a single internal representation for an instance of value 0.

Update: Fixed. Now, when the BigNumber is instantiated by passing a 0 uint256 value, is represented as an array of length 0.

[P4-L02] Complicated modulus length calculation

Low

In the function opAndSquare of the BigNumber library, the square is calculated by using the modular exponentiation precompile with a modulus value that is big enough to return the full exponentiation value.

The value of modulus is calculated in L487 and L496 with the following formula:

((base.length * 16 / 256) + 1) * 32

This is very hard to understand and unnecessary given the rest of the function assumes that base.length is a multiple of 32. Consider simplifying it to:

(base.length * 2) + 32

This shows in a clearer way that it has to be twice the length plus one extra word.

Update: Fixed.

[P4-L03] No mechanism to make a BigNumber instance from a zero byte

Low

The BigNumber library makes a new instance by calling one of the two _new functions. The first _new function receives a dynamically sized bytes array. When the array size is not a multiple of 32 bytes, it confirms that the first element of the array is not 0.

This means that it is not possible to make a new instance from a bytes array with a single zero byte.

However, it is possible to make a new instance with value 0 by calling the first _new function with an empty bytes array or by calling the second _new function with the 0 uint256. Nevertheless, for completeness, consider supporting the bytes array 0x0 as a valid argument to make a new BigNumber instance.

Update: Not fixed. Eco’s statement for this issue:

This functionality isn’t needed for our project, but would be a great addition to include in a published library.

[P4-L04] Lack of input validation

Low

In the BigNumber library, the function privateRightShift has a uint256 parameter for the number of bits to shift. The maximum value for that parameter should be 256, but this is never validated. If this function is called by mistake with a higher value, there will be an underflow in L632, and the results returned will be unexpected.

This is not currently vulnerable, because the privateRightShift function is only used internally to shift 2 bits. However, it will be hard to find the problem if the code is changed in the future and the wrong value is mistakenly passed to the function.

Consider adding this validation to fail as early and loudly as possible.

Update: Fixed. The privateRightShift function now has a requirement to only shift by two positions.

[P4-L05] Confusing loop boundary

Low

In line 639 of the BigNumber library, the variable max is intentionally set (unnecessarily with assembly) to uint256(-32). It is then used to bound a loop that starts counting from a multiple of 32 down to 0, subtracting 32 each time until it terminates when it reaches max. This is very confusing. Presumably, this pattern was chosen because the condition i >= 0 would always succeed for a uint256 value. Consider using a signed loop counter and stopping the loop when it becomes negative.

Update: Fixed. Note, however, that this change reduces the maximum size of a BigNumber. The length of the array is stored in a uint256 variable. Now, if the length is bigger than 2^128, it will overflow the cast to int256, giving unexpected results. This has been reported as an issue in the Phase 5.

[P4-L06] Duplicated load of the array length

Low

In the innerAdd function of the BigNumber library, the length of the two parameter arrays are repeatedly loaded with mload(_max) and mload(_min). Consider assigning the length of the arrays to two variables named maxLength and minLength, which will make the code more readable.

Also, note that in L277, the difference between mload(_max) and mload(_min) is repeatedly calculated inside a for loop. This difference is a constant, so consider calculating it once and assigning it to a variable.

Update: Fixed in 68adc904.

[P4-L07] Maximum uint256 value calculated with underflow

Low

In L261 and L370 of the BigNumber library, the maximum uint256 value is calculated by forcing an underflow.

This is hard to read. Consider using not(0) instead.

Update: Fixed.

[P4-L08] Inconsistent use of hexadecimal and decimal numbers

Low

In the BigNumber library, hexadecimal and decimal numbers are used inconsistently. For example, see 0x20 in L58 and 32 in L88.

To make the code easier to read, consider using number bases consistently.

Update: Fixed. The BigNumber library now uses hexadecimal numbers.

[P4-L09] Use of magic constants

Low

There are several occurrences of magic constants in the BigNumber library (e.g., L54, L544, L545, L583, and L584). These values make the code harder to understand and maintain.

Consider defining a constant variable for every magic constant, giving it a clear and self-explanatory name. For complex values, consider adding an inline comment explaining how they were calculated or why they were chosen. All of this will allow for added readability, easing the code’s maintenance.

Update: Not fixed. Eco’s statement for this issue:

We didn’t refactor all of the code when we imported the library. We’d prefer not to include external libraries this way at all, and are interested in helping to build a gas-efficient general big number library for Solidity. Once one is available we’ll migrate the code over to use it.

[P4-L10] Misleading comments

Low

In lines 600 and 606 of the BigNumber library, the comments refer to the variable length_ptr as start_ptr. Consider updating the comments to reflect the correct variable name.

In line 616, the comment is only valid if there are no leading zero words. Otherwise, the offset needs to be adjusted. Consider updating the comment to include the case with at least one leading zero word.

Update: Fixed.

[P4-L11] Missing explicit return statement

Low

Solidity allows the naming of the return variables on function declarations. When this feature is used, it is optional to use the return statement. If return is not explicitly called by the time a function ends, it returns any value assigned to the named return variable.

The BigNumber library uses named return variables extensively and uses explicit return statements inconsistently.

For explicitness and readability, consider always using the return statement.

Update: Fixed.

[P4-L12] Not using mixed case for variables

Low

In the assembly blocks of the BigNumber library, variables are named using lowercase with underscores.

This does not follow the Solidity style guide and is inconsistent with the rest of the variables declared outside of assembly blocks.

Consider using mixed case for all variables.

Update: Not fixed. See Eco’s statement for this issue in [P4-L09] Use of magic constants

Notes

  • In the BigNumber library, the cmp, innerAdd, innerDiff, and opAndSquare functions all implicitly assume the BigNumber instances have a length divisible by 32 bytes. To assist code comprehension and to catch errors early, consider adding an assert statement in each function to validate this condition.
    Update: Fixed.
  • Lines 481 and 516 of the BigNumber library, initialize a BigNumber instance by casting from a constant value with a long string of leading zeros. For clarity, consider passing a uint256 to the _new function. Similarly, line 494 allocates a word of memory by assigning a long hex string of zeros to a variable. Consider using the new bytes constructor.
    Update: Fixed.
  • Some variables are declared as uint and int in the BigNumber library (i.e., L126, L136, L191, L238, and L344). To favor explicitness, consider changing all instances of uint to uint256 and int to int256.
    Update: Fixed.
  • In lines 127 to 131 of the BigNumber library, there is a for loop without a body. To make it clearer, consider changing it to a while loop.
    Update: Fixed.
  • In lines 272 and 383 of the BigNumber library, there is a condition that uses two eq operators to check if a value is non-zero. In lines 318, 412, 429, 603, 647, and 668, the eq operator is used to check if a value is zero. For clarity, consider using the iszero operator.
    Update: Fixed.
  • In lines 574 and 591 of the BigNumber library, there is a switch statement with only one case. For clarity, consider using an if statement.
    Update: Fixed.
  • In line 603 of the BigNumber library, a boolean value is compared with 1. Consider removing this redundant check.
    Update: Fixed.
  • In the first _new function of the BigNumber library, _val.length is assigned to a variable after it has been used repeatedly. Consider defining the variable at the top of the function and using it throughout.
    Update: Fixed.
  • In lines 111–113 of the BigNumber library, fill a buffer from the back by incrementing the loop counter and subtracting it from the buffer length. For clarity, consider counting down.
    Update: Not fixed.
  • The opAndSquare function of the BigNumber library has a boolean parameter to select between the privateAdd and privateDiff operations. Consider adding two functions named addAndSquare and absDiffAndSquare to make it clearer which operation will be executed. These two functions should be the only direct callers of opAndSquare.
    Update: Not fixed.
  • To favor explicitness and readability, several parts of the contracts may benefit from better naming. Our suggestions are:

JTNDZGl2JTIwY2xhc3MlM0QlMjJidG4tY29udGFpbmVyJTIyJTNFJTBBJTBBJTNDYnV0dG9uJTIwb25jbGljayUzRCUyMmN1c3RvbXNjcm9sbCUyOCUyOSUyMiUzRSUzQ2ElMjBocmVmJTNEJTIyJTIzcGhhc2UtMyUyMiUyMGNsYXNzJTNEJTIyY3VzdG9tLWxpbmslMjIlM0UlM0MlMjBQcmV2aW91cyUzQyUyRmElM0UlM0MlMkZidXR0b24lM0UlMEElMEElM0NidXR0b24lMjBvbmNsaWNrJTNEJTIyY3VzdG9tc2Nyb2xsJTI4JTI5JTIyJTNFJTNDYSUyMGhyZWYlM0QlMjIlMjNwaGFzZS01JTIyJTIwY2xhc3MlM0QlMjJjdXN0b20tbGluayUyMiUzRW5leHQlMjAlM0UlM0MlMkZhJTNFJTNDJTJGYnV0dG9uJTNFJTBBJTBBJTNDJTJGZGl2JTNF

Phase 5: Integration

The phase 5 audit was delivered to the Eco team on November 8th, 2019.

To finish the audit engagement with the Eco team, we wanted to spend some additional time reviewing the changes they had done to the contracts since we audited them and to evaluate the system as a whole.

In this phase, we reviewed the integration of the 4 previous phases. We worked on commit af3428020545e3f3ae2f3567b94e1fbc5e5bdb4c of the currency repository.

Here are our audit assessment and recommendations, in order of importance.

Update: the Eco team made some fixes based on our recommendations. We address below the fixes introduced up to commit d1b4bfe01310c709e54f9b4bf3fc123fba55af2a of the currency repository.

Critical Severity

No new critical severity issues were found.

 

High Severity

No new high severity issues were found.

 

Medium Severity

[P5-M01] Policy self-removal not failing loudly

Medium

Component: policy

In the Policy contract, the removeSelf function checks if the sender is the current interface implementer. If it is not, the function just does nothing, failing to explicitly inform the caller of a failed transaction.

Following the Fail Loudly principle, and to avoid hiding errors from the caller, consider reverting the transaction when the sender is not required.

Update: Not fixed. The code remains the same. Nevertheless, now the comment has changed and it states, “[…] if another contract has taken the role, this does nothing”. Eco’s statement for this issue:

The removeSelf function fails silently to allow its use in places where another contract may have taken ownership of the role. For example, when a contract is being destructed it can first removeSelf from its usual role without worrying that another contract might have been granted the role.

 

Low Severity

[P5-L01] Use of hash constants without comment

Low

Component: policy

In the PolicedUtils, there are 11 constants for the identifiers of the policies. The value of these constants is a hash value, generated from a human-readable string that describes the policy. However, the corresponding strings are not present in the code. This makes it hard to understand where the hashes come from.

Consider adding a comment before every constant with the string used to generate the hash.

Update: Fixed. Now all 11 constants have comments with the strings used to generate the hashes.

[P5-L02] The AccountBalanceGenerationUpdate event is missing relevant data

Low

Component: currency

In the EcoBalanceStore contract, the AccountBalanceGenerationUpdate event does not log the generation to which the address has been updated. This may impede reconstructing the history of generation updates for an account through emitted events.

Consider adding the generation as a parameter to the event.

Update: Fixed. The event now logs the generation too.

[P5-L03] Outdated README file in the currency repository

Low

Component: currency

The README file of the currency repository is outdated. For example, it refers to the functions burn and updateTo, which have been renamed. It also mentions that the EcoBalanceStore contract implements the ERC20 interface, which is no longer true.

Consider updating all documentation in the README file to reflect the current state of the code base.

Update: Fixed. All documentation related to the EcoBalanceStore contract API has been removed.

[P5-L04] The tokenTransfer and tokenBurn functions do not fail early

Low

Component: currency

In the EcoBalanceStore contract, the tokenTransfer and tokenBurn functions are do not follow the fail early pattern. These functions first update the balances, and afterwards check if the operation is authorized, reverting the transaction if not.

Consider first validating whether the sender is an authorized account, and then apply balance updates.

Update: Fixed. Now, in the tokenTransfer function the authorization check comes before the balance updates. The same happens with the tokenBurn function: the authorization check comes before the updates.

[P5-L05] Undocumented authorization in the tokenBurn function

Low

Component: currency

In the EcoBalanceStore contract, the tokenBurn function allows the policy contract to burn tokens from any account. However, such sensitive behavior is not documented.

Consider explicitly stating this in the function’s docstrings.

Update: Fixed. Now, the function’s docstrings state that the root policy contract is authorized to call the function. Yet, it doesn’t explicitly say that it can burn tokens from any account.

[P5-L06] Unused Transfer event

Low

Component: currency

In the EcoBalanceStore contract, there is a declared Transfer event that is never used.

Consider removing it.

Update: Fixed. The Transfer event has been removed.

[P5-L07] Wrong comment in the AccountBalanceGenerationUpdate event

Low

Component: currency

The comment of the AccountBalanceGenerationUpdate event in the EcoBalanceStore contract mentions a value parameter that does not exist.

Consider removing this line from the comment.

Update: Fixed. The wrong comment in the AccountBalanceGenerationUpdate event has been removed.

[P5-L08] Wrong comment in the tokenTransfer and tokenBurn functions

Low

Component: currency

In the EcoBalanceStore contract, the functions tokenTransfer and tokenBurn say in their docstrings, “This function is restricted and can only be accessed by authorized addresses — specifically those in the authorizedContracts set.”

However, the authorizedContracts array does not contain addresses. The array actually used in these functions is authorizedContractAddresses.

Consider updating the functions’ docstrings to better reflect which data structure holds the authorized addresses allowed to call them.

Update: Fixed. Now the authorizedContractAddresses array is mentioned in the docstrings of the tokenTransfer function and in the ones of the tokenBurn function.

[P5-L09] Undocumented assembly block in the IsPrime contract

Low

Component: VDF

The IsPrime contract contains an assembly block without extensive documentation.

As this is a low-level language that is harder to parse by readers, consider including extensive documentation regarding the rationale behind its use, clearly explaining what every single assembly instruction does. This will make it easier for users to trust the code, for reviewers to verify it, and for developers to build on top of it or update it.

Update: Fixed. The ECO team has added inline comments to the assembly code.

[P5-L10] Wrong comments for the calculation of maximum uint256

Low

Component: VDF

In lines 289 and 403 of BigNumber.sol, the maximum possible uint256 is calculated with not(0x0). However, the comments next to both statements say it is calculated using an underflow.

Consider updating the inline comments to avoid mismatches with the actual implementation.

Update: Fixed. Both comments in lines 289 and 403 have been updated to describe the actual implementation.

[P5-L11] Maximum BigNumber is not enforced or documented

Low

Component: VDF

In the privateRightShift function of the BigNumber library, there is a cast of the array length from uint256 to int256. This means that if the length of the array is bigger than 2^128, it will overflow the cast and become negative, giving unexpected results. We do not expect users of the library to require numbers this big. We do not even know what would happen to the EVM in those cases. The block gas limit would be exceeded by too much. However, it is important to document the limitations of the library and prevent extreme use cases that could break it.

Consider adding a require statement to the from function or before the cast to make sure that it will never overflow.

Consider experimenting with the upper limits of the library to document the maximum possible BigNumber that it can handle.

Update: Fixed. Now, the length of the array is checked before the cast to int256. Note that the length local variable could be used to avoid reading the array’s length again. Moreover, the error message should better denote the actual condition checked, such as “Length of the dividend’s value must be equal or less than 1024 bytes”.

Notes

JTNDZGl2JTIwY2xhc3MlM0QlMjJidG4tY29udGFpbmVyJTIyJTNFJTBBJTBBJTNDYnV0dG9uJTIwb25jbGljayUzRCUyMmN1c3RvbXNjcm9sbCUyOCUyOSUyMiUzRSUzQ2ElMjBocmVmJTNEJTIyJTIzcGhhc2UtNCUyMiUyMGNsYXNzJTNEJTIyY3VzdG9tLWxpbmslMjIlM0UlM0MlMjBQcmV2aW91cyUzQyUyRmElM0UlM0MlMkZidXR0b24lM0UlMEElMEElM0MlMkZkaXYlM0U=